# Getting out of Estopped message

**URL:** <https://forum.onefinitycnc.com/t/getting-out-of-estopped-message/12432>\
**Category:** Controller (Buildbotics) Discussion\
**Created:** [April 12, 2022, 5:28pm UTC](https://forum.onefinitycnc.com/t/getting-out-of-estopped-message/12432 "2022-04-12T17:28:54Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![iamthenuke](https://avatars.discourse-cdn.com/v4/letter/i/4af34b/32.png) [@iamthenuke](https://forum.onefinitycnc.com/u/iamthenuke)\
**Post date:** [April 12, 2022, 5:28pm UTC](https://forum.onefinitycnc.com/t/getting-out-of-estopped-message/12432/1 "2022-04-12T17:28:54Z")

</div>

The only way I can get the Estopped message on my screen is to do a complete shutdown of the controller. This seems to be overkill … is there a more practical way to undo this? Nothing happens when I push the button on the screen.  
thanks for any feedback

---

<div class="post-metadata">

**Author:** ![EdwoodCrafting](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/edwoodcrafting/32/5114_2.png) [@EdwoodCrafting](https://forum.onefinitycnc.com/u/EdwoodCrafting)\
**Post date:** [April 12, 2022, 5:39pm UTC](https://forum.onefinitycnc.com/t/getting-out-of-estopped-message/12432/2 "2022-04-12T17:39:38Z")

</div>

In the same boat here. Noticed this happens alto when using the Jtech tool

---

<div class="post-metadata">

**Author:** ![abomb](https://avatars.discourse-cdn.com/v4/letter/a/7cd45c/32.png) [@abomb](https://forum.onefinitycnc.com/u/abomb)\
**Post date:** [April 16, 2022, 6:00pm UTC](https://forum.onefinitycnc.com/t/getting-out-of-estopped-message/12432/3 "2022-04-16T18:00:16Z")

</div>

Hit the refresh symbol usually works for just about anything for me as long as the screen isn’t frozen.

![Screenshot_20220416-105742_Google](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/a/f/afd30cbfb867062507233bc678b3938d72665690.jpeg)

---

<div class="post-metadata">

**Author:** ![iamthenuke](https://avatars.discourse-cdn.com/v4/letter/i/4af34b/32.png) [@iamthenuke](https://forum.onefinitycnc.com/u/iamthenuke)\
**Post date:** [April 19, 2022, 9:22pm UTC](https://forum.onefinitycnc.com/t/getting-out-of-estopped-message/12432/4 "2022-04-19T21:22:25Z")

</div>

thanks for this information…will try this next time I need to get out of the Estopped message