# Glitch when carving 3D!

**URL:** <https://forum.onefinitycnc.com/t/glitch-when-carving-3d/18021>\
**Category:** Troubleshooting (X35/X50)\
**Created:** [January 11, 2023, 1:51pm UTC](https://forum.onefinitycnc.com/t/glitch-when-carving-3d/18021 "2023-01-11T13:51:17Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [January 11, 2023, 2:44pm UTC](https://forum.onefinitycnc.com/t/glitch-when-carving-3d/18021/2 "2023-01-11T14:44:55Z")

</div>

Hey Ben,

> [@LostWoodsCreative](#):
>
> Has anyone had a glitch like this happen?

yes, this is reported from time to time in this forum. Use the search function, e.g. search for [Z plunge](https://forum.onefinitycnc.com/search?q=z%20plunge). Often it’s the Z cable or its connector, but it can be also the bit which becomes loose due to dust inside the collet.

See also:

- [Support: Z Axis Moving Unexpectedly (Cutting too shallow or too deep)](https://forum.onefinitycnc.com/t/z-axis-moving-unexpectedly-cutting-too-shallow-or-too-deep/14829)

---

_[View the full topic](https://forum.onefinitycnc.com/t/glitch-when-carving-3d/18021)._