# Hello! I keep getting error messages from Motor 3. What should I do?

**URL:** <https://forum.onefinitycnc.com/t/hello-i-keep-getting-error-messages-from-motor-3-what-should-i-do/10212>\
**Category:** Troubleshooting (X35/X50)\
**Created:** [January 10, 2022, 3:42am UTC](https://forum.onefinitycnc.com/t/hello-i-keep-getting-error-messages-from-motor-3-what-should-i-do/10212 "2022-01-10T03:42:47Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![matthew633](https://avatars.discourse-cdn.com/v4/letter/m/f6c823/32.png) [@matthew633](https://forum.onefinitycnc.com/u/matthew633)\
**Post date:** [January 10, 2022, 3:42am UTC](https://forum.onefinitycnc.com/t/hello-i-keep-getting-error-messages-from-motor-3-what-should-i-do/10212/1 "2022-01-10T03:42:47Z")

</div>

Hello! I keep getting error messages from Motor 3. What should I do?

 ![KakaoTalk_20220110_123959332](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/0/0d6b58e0a1c58e692ef67e6c55db586bbf522f58.jpeg)  
 ![KakaoTalk_20220110_123959332_01](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/b/b828404aa95be2fe135abec3e722cd3c147b7e50.jpeg)  
 ![KakaoTalk_20220110_123959332_02](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/f/f9be5752fafdce465f72fb9191cfdb897292151d.jpeg)

---

<div class="post-metadata">

**Author:** ![AndyP](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/andyp/32/1106_2.png) [@AndyP](https://forum.onefinitycnc.com/u/AndyP)\
**Post date:** [January 10, 2022, 9:14am UTC](https://forum.onefinitycnc.com/t/hello-i-keep-getting-error-messages-from-motor-3-what-should-i-do/10212/2 "2022-01-10T09:14:51Z")

</div>

I’d contact @OnefinityCNC. I’ve no memory of seeing that one come up on the forum.

---

<div class="post-metadata">

**Author:** ![pwpacp](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/pwpacp/32/1718_2.png) [@pwpacp](https://forum.onefinitycnc.com/u/pwpacp)\
**Post date:** [January 10, 2022, 1:37pm UTC](https://forum.onefinitycnc.com/t/hello-i-keep-getting-error-messages-from-motor-3-what-should-i-do/10212/3 "2022-01-10T13:37:30Z")

</div>

Have you investigated possible connection issues with “Z” axis’ motor? The cable has four wires terminating at both the motor and the controller. A wonky connection on any of them will cause a motor fault.  
I added a little more ‘hot glue’ on all of my cable connectors to make sure none of them flexed at those junctions as a just-in-case.

---

<div class="post-metadata">

**Author:** ![matthew633](https://avatars.discourse-cdn.com/v4/letter/m/f6c823/32.png) [@matthew633](https://forum.onefinitycnc.com/u/matthew633)\
**Post date:** [January 10, 2022, 10:43pm UTC](https://forum.onefinitycnc.com/t/hello-i-keep-getting-error-messages-from-motor-3-what-should-i-do/10212/5 "2022-01-10T22:43:20Z")

</div>

The connection line is normal. When I connected the z-axis motor to the x-axis motor, the motor moved and stopped moving. Perhaps there is a problem with the motor.

---

<div class="post-metadata">

**Author:** ![pwpacp](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/pwpacp/32/1718_2.png) [@pwpacp](https://forum.onefinitycnc.com/u/pwpacp)\
**Post date:** [January 11, 2022, 12:34am UTC](https://forum.onefinitycnc.com/t/hello-i-keep-getting-error-messages-from-motor-3-what-should-i-do/10212/6 "2022-01-11T00:34:11Z")

</div>

If the motor moved then stopped it doesn’t sound like a motor problem but the z-axis cable. You could try it again while gently wiggling the cable at each end to see if that makes it stop moving.

---

<div class="post-metadata">

**Author:** ![matthew633](https://avatars.discourse-cdn.com/v4/letter/m/f6c823/32.png) [@matthew633](https://forum.onefinitycnc.com/u/matthew633)\
**Post date:** [January 11, 2022, 1:24am UTC](https://forum.onefinitycnc.com/t/hello-i-keep-getting-error-messages-from-motor-3-what-should-i-do/10212/8 "2022-01-11T01:24:06Z")

</div>

I think the motor is defective. What do you think? Please refer to my YouTube video.

[![]( " - YouTube") ](https://www.youtube.com/watch?v=ICWl6x7scuM)

---

<div class="post-metadata">

**Author:** ![pwpacp](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/pwpacp/32/1718_2.png) [@pwpacp](https://forum.onefinitycnc.com/u/pwpacp)\
**Post date:** [January 11, 2022, 2:36am UTC](https://forum.onefinitycnc.com/t/hello-i-keep-getting-error-messages-from-motor-3-what-should-i-do/10212/9 "2022-01-11T02:36:24Z")

</div>

The fact that the z-axis moves (shuddering but moves) indicates it is probably ok. (The reason it shudders when connected using the x-axis controller’s output via the x-axis cable is because z-axis does not ‘pin-out’ the same as the x-axis cable.) The z-axis has reversed wires relative to those in the x&y cables. I had forgotten that fact when I suggested troubleshooting using the x axis cable because I have drag chains and don’t use the stock curly cable.

Try hooking up the curly (z) cable again then gently wiggling the connections on each end while trying to move z+/-. If the motor starts/stops you’ll know which connector is the problem.

Note though, the z motor’s pigtail connector could also be suspect as well as the curly cable.

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [January 11, 2022, 2:10pm UTC](https://forum.onefinitycnc.com/t/hello-i-keep-getting-error-messages-from-motor-3-what-should-i-do/10212/10 "2022-01-11T14:10:58Z")

</div>

100% you cannot have the x rail directly connected. You MUST use the curly cable for the z. There is a wire cross in the z curly cable…and since there isn’t one in the straight x cable, you’ve now crossed wires to the motor…which could lead to a motor failure. Hook the z curly cable back in. Hopefully it won’t give you an error. I fear you might have done damage by directly connecting the x cable to the z.
