# Help Obi Wan, Wasteboard disaster

**URL:** <https://forum.onefinitycnc.com/t/help-obi-wan-wasteboard-disaster/2524>\
**Category:** Wasteboard\
**Created:** [January 3, 2021, 9:59pm UTC](https://forum.onefinitycnc.com/t/help-obi-wan-wasteboard-disaster/2524 "2021-01-03T21:59:18Z")\
**Posts on this page:** 5\
**Page:** 2

<div class="post-metadata">

**Author:** ![BelowTheBark](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/belowthebark/32/1578_2.png) [@BelowTheBark](https://forum.onefinitycnc.com/u/BelowTheBark)\
**Post date:** [January 7, 2021, 11:50pm UTC](https://forum.onefinitycnc.com/t/help-obi-wan-wasteboard-disaster/2524/21 "2021-01-07T23:50:55Z")

</div>

I changed more than one variable each time, so I’m not exactly sure. On the last run that fixed it, I made sure I was running the G-code with post processer as GRBL (instead of Basic G Code) out of Carbide Create, and I also changed the units to Metric since that is what shows up as default on the 1F. I have since cut some of the Cam clamps with great success as well.

---

<div class="post-metadata">

**Author:** ![RonHoppus](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/ronhoppus/32/2374_2.png) [@RonHoppus](https://forum.onefinitycnc.com/u/RonHoppus)\
**Post date:** [January 8, 2021, 12:25am UTC](https://forum.onefinitycnc.com/t/help-obi-wan-wasteboard-disaster/2524/22 "2021-01-08T00:25:59Z")

</div>

What Cam clamps? 🙂

---

<div class="post-metadata">

**Author:** ![BelowTheBark](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/belowthebark/32/1578_2.png) [@BelowTheBark](https://forum.onefinitycnc.com/u/BelowTheBark)\
**Post date:** [January 9, 2021, 12:10am UTC](https://forum.onefinitycnc.com/t/help-obi-wan-wasteboard-disaster/2524/23 "2021-01-09T00:10:44Z")

</div>

Just the Cam Clamps from @MyersWoodshop you can get them on his Etsy [CNC Laser 3D Printing SVGs Digital Files And by BenMyersWoodshop](https://www.etsy.com/shop/BenMyersWoodshop?section_id=25378055) or on his blog for free [https://www.myerswoodshop.com/](https://www.myerswoodshop.com/) he has a pretty strong following around his threaded waste board setup. Search Myers Woodshop on youtube and you will see his setup for his Shapeoko, but it all works just as well for the 1F.

---

<div class="post-metadata">

**Author:** ![MyersWoodshop](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/myerswoodshop/32/27_2.png) [@MyersWoodshop](https://forum.onefinitycnc.com/u/MyersWoodshop)\
**Post date:** [January 22, 2021, 4:23pm UTC](https://forum.onefinitycnc.com/t/help-obi-wan-wasteboard-disaster/2524/24 "2021-01-22T16:23:51Z")

</div>

Man, I really need to get v2 of the wasteboard done!

---

<div class="post-metadata">

**Author:** ![noto](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/noto/32/564_2.png) [@noto](https://forum.onefinitycnc.com/u/noto)\
**Post date:** [January 25, 2021, 1:47am UTC](https://forum.onefinitycnc.com/t/help-obi-wan-wasteboard-disaster/2524/25 "2021-01-25T01:47:24Z")

</div>

> [@BelowTheBark](#):
>
> essor instead of Basic G code. I also set the output units to metric since that is the default on the 1F. I’ve still got about 20% left to run but it is looking spot on. Thanks for the suggestions and thanks for the great support from Onefinity. Much appreciated, and hopefully a few lessons learned on my part.

Yes, please… my 1F is in testing and packing!

[Previous page](https://forum.onefinitycnc.com/t/help-obi-wan-wasteboard-disaster/2524.md?page=1)