# How to replace the Backlight Cable in Masso G3 Touch FAQ

**URL:** <https://forum.onefinitycnc.com/t/how-to-replace-the-backlight-cable-in-masso-g3-touch-faq/26315>\
**Category:** Official 1F Elite (Gen 1) (MASSO) FAQs\
**Created:** [April 4, 2024, 1:34pm UTC](https://forum.onefinitycnc.com/t/how-to-replace-the-backlight-cable-in-masso-g3-touch-faq/26315 "2024-04-04T13:34:46Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [April 4, 2024, 1:34pm UTC](https://forum.onefinitycnc.com/t/how-to-replace-the-backlight-cable-in-masso-g3-touch-faq/26315/1 "2024-04-04T13:34:46Z")

</div>

[Replacing the Backlight cable.pdf](https://forum.onefinitycnc.com/uploads/short-url/54lsEHx7PeLFtMFU1YPxG6CGPFe.pdf) (1.4 MB)