# I need a shopping list for ordering my first CNC **URL:** \ **Category:** Original/PRO Series (Buildbotics) (Gen 1)\ **Created:** [March 27, 2023, 4:49pm UTC](https://forum.onefinitycnc.com/t/i-need-a-shopping-list-for-ordering-my-first-cnc/19705 "2023-03-27T16:49:42Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\ **Post date:** [March 27, 2023, 11:10pm UTC](https://forum.onefinitycnc.com/t/i-need-a-shopping-list-for-ordering-my-first-cnc/19705/4 "2023-03-27T23:10:56Z")
Hey Scott, > [@jscottsmith](#): > > **I’d like to get what I need all in one shot rather than start out and keep running into roadblocks. For those of you ahead of me, what would you recommend?** > > Looking at the order page, I selected the X-50 Journeyman, and presumed I need the Onefinity Controller and 10.8" display. They currently are including the joypad, touch probe, and Carveco. (Is this much correct?) > > What else do I need? > > clamps? > wasteboard? > table/stand? > dust boot? > bits? (is there a starter combo set?) I wrote this the other day: - [Brand new to CNC, Looking for what is really needed – Post #6 by Aiph5u](https://forum.onefinitycnc.com/t/brand-new-to-cnc-looking-for-what-is-really-needed/10804/6) > [@jscottsmith](#): > > Do I use a shopvac or will I need a specific dust control unit? - [Difference between a workshop vacuum cleaner and a dust collection system](https://forum.onefinitycnc.com/t/suckit-dust-shoe-bristles-causing-blockage/14577/2) I would not recommend the tiny touch monitor, except if you have very small hands and are younger than 45. For display size choice and optionally using other input devices [see here](https://forum.onefinitycnc.com/t/that-pesky-monitor-mount-solved/8338/29) Welcome to the forum! --- _[View the full topic](https://forum.onefinitycnc.com/t/i-need-a-shopping-list-for-ordering-my-first-cnc/19705)._