# If you are running the cnc will stop automatically to change the bit (tool)

**URL:** <https://forum.onefinitycnc.com/t/if-you-are-running-the-cnc-will-stop-automatically-to-change-the-bit-tool/9081>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [November 23, 2021, 3:36am UTC](https://forum.onefinitycnc.com/t/if-you-are-running-the-cnc-will-stop-automatically-to-change-the-bit-tool/9081 "2021-11-23T03:36:37Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![raceump](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/raceump/32/5511_2.png) [@raceump](https://forum.onefinitycnc.com/u/raceump)\
**Post date:** [November 23, 2021, 3:36am UTC](https://forum.onefinitycnc.com/t/if-you-are-running-the-cnc-will-stop-automatically-to-change-the-bit-tool/9081/1 "2021-11-23T03:36:37Z")

</div>

if you are running the cnc will stop automatically to change the bit (tool)

---

<div class="post-metadata">

**Author:** ![pootaholic](https://avatars.discourse-cdn.com/v4/letter/p/8e7dd6/32.png) [@pootaholic](https://forum.onefinitycnc.com/u/pootaholic)\
**Post date:** [November 23, 2021, 4:54am UTC](https://forum.onefinitycnc.com/t/if-you-are-running-the-cnc-will-stop-automatically-to-change-the-bit-tool/9081/2 "2021-11-23T04:54:23Z")

</div>

If you need to change tools (bits) then you should save each toolpath as an separate file. Once it completes the first toolpath it will return to your X, Y zero position and allow you to raise the bit, change to another bit and then re-zero the z-axis.

---

<div class="post-metadata">

**Author:** ![suprak](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/suprak/32/5173_2.png) [@suprak](https://forum.onefinitycnc.com/u/suprak)\
**Post date:** [November 23, 2021, 5:06am UTC](https://forum.onefinitycnc.com/t/if-you-are-running-the-cnc-will-stop-automatically-to-change-the-bit-tool/9081/3 "2021-11-23T05:06:41Z")

</div>

Depending on what post processor you’re using you can also modify it, to explicitly call for a tool change.  
Or you can even make it prompt you with a custom message.

For reference, I use Fusion360 and modified the post processor to produce `T1 M0 (MSG, Change bit to T3)` on tool changes.

```auto
        writeBlock(
            "T" + toolFormat.format(tool.number),
            conditional(getProperty("useM06"), mFormat.format(6)),
            mFormat.format(0),
            formatComment("MSG, Change tool to T" + tool.number + "," + tool.description)
        );
        /* original logic for tool change
        if (!isFirstSection()) {
            writeBlock("T" + toolFormat.format(tool.number), conditional(getProperty("useM06"), mFormat.format(6)));
        } else {
            writeComment("T" + toolFormat.format(tool.number));
        }
        */

```

If you follow the original logic, tool changes were not printed unless it wasn’t the first section AND the tool was different than in previous.

In my case I want explicit call for explicit tool each time.
