# Import files via wifi **URL:** \ **Category:** Elite Series (Masso & Redline) (Gen 1)\ **Created:** [November 29, 2025, 1:37pm UTC](https://forum.onefinitycnc.com/t/import-files-via-wifi/36706 "2025-11-29T13:37:48Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Macswoods](https://avatars.discourse-cdn.com/v4/letter/m/ad7895/32.png) [@Macswoods](https://forum.onefinitycnc.com/u/Macswoods)\ **Post date:** [November 29, 2025, 1:37pm UTC](https://forum.onefinitycnc.com/t/import-files-via-wifi/36706/1 "2025-11-29T13:37:48Z")
How do I import files via wifi so I don’t have to go back and forth to the house with my USB drive? I did connect to my wifi in the shop. That’s a different router than my wifi in the house if that makes a difference. Because of the distance they’re different networks. Am hoping I can save the files in Dropbox or Google Drive and access that way? Am unsure how to navigate to the files Elite Series with @Redlinecnc Controller ---
**Author:** ![TMToronto](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TMToronto](https://forum.onefinitycnc.com/u/TMToronto)\ **Post date:** [November 29, 2025, 2:55pm UTC](https://forum.onefinitycnc.com/t/import-files-via-wifi/36706/2 "2025-11-29T14:55:07Z")
My understanding is that they must be on the same network, as the computer you use will access the Redline via its IP address. I do not believe it can work the other way, including the controller accessing a network drive or cloud service storage like Google Drive or Dropbox. My recommendation would be to find a way to have your home PC and shop Redline on the same network. If you ask this in the forum I am sure you will get examples of the hardware that would allow you to do this, as many solutions exist - it will be an added expense but worth the time and money IMO. ---
**Author:** ![Macswoods](https://avatars.discourse-cdn.com/v4/letter/m/ad7895/32.png) [@Macswoods](https://forum.onefinitycnc.com/u/Macswoods)\ **Post date:** [November 29, 2025, 8:51pm UTC](https://forum.onefinitycnc.com/t/import-files-via-wifi/36706/3 "2025-11-29T20:51:07Z")
Thank you, will need to do some research ---
**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Post date:** [December 26, 2025, 8:15pm UTC](https://forum.onefinitycnc.com/t/import-files-via-wifi/36706/4 "2025-12-26T20:15:20Z")
You can do so by putting in the ip address of your redline controller that is on the same network. It will pop up in your internet browser. Very simple!