# Installing the Journeyman

**URL:** <https://forum.onefinitycnc.com/t/installing-the-journeyman/20535>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [May 11, 2023, 1:00am UTC](https://forum.onefinitycnc.com/t/installing-the-journeyman/20535 "2023-05-11T01:00:28Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [May 12, 2023, 1:38pm UTC](https://forum.onefinitycnc.com/t/installing-the-journeyman/20535/6 "2023-05-12T13:38:14Z")

</div>

Hey Bill,

thank you so much!

I must confess that when searching for the bookmark, in the hurry I have only found the older drawing that you made in Jul 2021 (to which I added the metric values), but you made a more recent on May 2022 (one year ago) 🙂

> [@Can anyone send me a link to the Journeyman Manual please?](https://forum.onefinitycnc.com/t/can-anyone-send-me-a-link-to-the-journeyman-manual-please/13171/9):
>
> Yes, correct! Best placement for stability. Just plan for hardware access if you plan on using a bolt/nut configuration as opposed to lag screws that only require one-sided access. Here’s some additional info on what you’ll be working with for mounting:
> 
> (apologies to @349iq2345) 🙂  
> Edit: (drawing updated to atone for previous oversight of disregard of metric dimensions) 😉
> 
> ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/f/fb5687c0ddde15ac1f356cfe8ff077f15de89781.png)

So please forgive me if I caused you additional work!

---

_[View the full topic](https://forum.onefinitycnc.com/t/installing-the-journeyman/20535)._