# Introducing the new Onefinity ELITE Series, Powered by MASSO **URL:** \ **Category:** Announcements\ **Created:** [November 25, 2022, 9:42pm UTC](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706 "2022-11-25T21:42:03Z")\ **Posts on this page:** 20\ **Page:** 5
**Author:** ![Kaz](https://avatars.discourse-cdn.com/v4/letter/k/ecd19e/32.png) [@Kaz](https://forum.onefinitycnc.com/u/Kaz)\ **Post date:** [November 28, 2022, 3:23pm UTC](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706/87 "2022-11-28T15:23:16Z")
thanks - but I would like to have the 80mm as “additional” - not as one or the other please. 🙂 Great about tool setter - any idea about price? ---
**Author:** ![kas](https://avatars.discourse-cdn.com/v4/letter/k/a88e57/32.png) [@kas](https://forum.onefinitycnc.com/u/kas)\ **Post date:** [November 28, 2022, 7:14pm UTC](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706/88 "2022-11-28T19:14:57Z")
Good morning @OnefinityCNC. The Elite Series hits the sweet spot. I ordered a this morning 😸 … Would it be possible to get engineering drawings for the y-rails mounting pattern, hole dimensions, and ideally the entire machine? I am also trying to figure out where the center of the 80 mm spindle lands when it is as far towards the front as possible (for vertical work holding and machining). Extra bonus points if you can make this available as some kind of file that I can import into Fusion 360 for fitting everything together. One more thing, will the Onefinity Masso controller work with Masso accessories, in particular the relay module and pendant? Thanks! ---
**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Post date:** [November 28, 2022, 8:20pm UTC](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706/89 "2022-11-28T20:20:23Z")
tech drawings will come at some point. Yes, it works with anything masso, There are already two relays connected, one for vac, one for router. ---
**Author:** ![kas](https://avatars.discourse-cdn.com/v4/letter/k/a88e57/32.png) [@kas](https://forum.onefinitycnc.com/u/kas)\ **Post date:** [November 28, 2022, 8:37pm UTC](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706/90 "2022-11-28T20:37:45Z")
Fantastic! Thanks for the quick reply. ---
**Author:** ![brownswoodwork](https://avatars.discourse-cdn.com/v4/letter/b/43a26b/32.png) [@brownswoodwork](https://forum.onefinitycnc.com/u/brownswoodwork)\ **Post date:** [November 28, 2022, 9:02pm UTC](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706/91 "2022-11-28T21:02:15Z")
I wonder if Onefinity will sell a tool changer or if this is something that we will have to manage 3rd-party ---
**Author:** ![Almtchncn](https://avatars.discourse-cdn.com/v4/letter/a/46a35a/32.png) [@Almtchncn](https://forum.onefinitycnc.com/u/Almtchncn)\ **Post date:** [November 28, 2022, 9:31pm UTC](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706/92 "2022-11-28T21:31:02Z")
[![](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.onefinitycnc.com/onefinitycnc/135/7_2.png)](https://forum.onefinitycnc.com/u/OnefinityCNC) [OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)[Onefinity Support](https://forum.onefinitycnc.com/u/OnefinityCNC)Leader [7h](https://forum.onefinitycnc.com/t/where-i-want-to-be-am-i-dreaming/16858/2) - Put in a 80mm Spindle on the journeyman to spin 1/2 shank bits (no matter what you’d do, you’d need that). - Buy a different brand to gain an ATC. We don’t have one. This was in another post 7 hours ago. ---
**Author:** ![Dpastell](https://avatars.discourse-cdn.com/v4/letter/d/d26b3c/32.png) [@Dpastell](https://forum.onefinitycnc.com/u/Dpastell)\ **Post date:** [November 28, 2022, 10:12pm UTC](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706/93 "2022-11-28T22:12:15Z")
Does the new z20 slider when set up for a 65mm spindle have ample clearance on the servo and mount? ---
**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Post date:** [November 28, 2022, 10:41pm UTC](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706/94 "2022-11-28T22:41:41Z")
yes, a spindle will clear the stepper motor on the Z-20 with a 65mm mount. ---
**Author:** ![BryceJ](https://avatars.discourse-cdn.com/v4/letter/b/d26b3c/32.png) [@BryceJ](https://forum.onefinitycnc.com/u/BryceJ)\ **Post date:** [November 29, 2022, 12:43am UTC](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706/95 "2022-11-29T00:43:02Z")
Win OnefinityCNC be selling the MASSO MPG Pendant, or will that have to be sourced from them directly? ---
**Author:** ![HardtailSr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/hardtailsr/32/35326_2.png) [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)\ **Post date:** [November 29, 2022, 7:08pm UTC](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706/96 "2022-11-29T19:08:11Z")
Will you still be offering the regular series or will that be transitioned out? ---
**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Post date:** [November 29, 2022, 7:08pm UTC](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706/97 "2022-11-29T19:08:51Z")
The regular series is a fantastic value and won’t be going anywhere. ---
**Author:** ![HardtailSr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/hardtailsr/32/35326_2.png) [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)\ **Post date:** [November 29, 2022, 7:18pm UTC](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706/98 "2022-11-29T19:18:51Z")
that is good to know. ---
**Author:** ![Spes](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@Spes](https://forum.onefinitycnc.com/u/Spes)\ **Post date:** [December 2, 2022, 10:03pm UTC](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706/99 "2022-12-02T22:03:41Z")
The description says Imust use the 15" screen on the Elite series. Really? I can’t use the 22" touchscreen I have for my X 35? ---
**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Post date:** [December 3, 2022, 12:05am UTC](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706/100 "2022-12-03T00:05:55Z")
Yes, because the screen IS the controller. It’s an all in one unit. ---
**Author:** ![Mike01](https://avatars.discourse-cdn.com/v4/letter/m/50afbb/32.png) [@Mike01](https://forum.onefinitycnc.com/u/Mike01)\ **Post date:** [December 6, 2022, 12:52am UTC](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706/101 "2022-12-06T00:52:27Z")
Will the new Elite line have a post processor for Fusion 360? ---
**Author:** ![TMToronto](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TMToronto](https://forum.onefinitycnc.com/u/TMToronto)\ **Post date:** [December 6, 2022, 1:47am UTC](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706/102 "2022-12-06T01:47:01Z")
I have been using a Masso G3 with my Woodworker and F360 for quite a while now - there is a PP available at Autodesk. ---
**Author:** ![Mike01](https://avatars.discourse-cdn.com/v4/letter/m/50afbb/32.png) [@Mike01](https://forum.onefinitycnc.com/u/Mike01)\ **Post date:** [December 6, 2022, 2:17am UTC](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706/103 "2022-12-06T02:17:07Z")
I did see it but wasn’t sure the generic mill version was working well with the Onefinity machines. Good to know someone is using it successfully. I really prefer staying in Fusion 360 if possible. Thank you. ---
**Author:** ![cheman](https://avatars.discourse-cdn.com/v4/letter/c/c2a13f/32.png) [@cheman](https://forum.onefinitycnc.com/u/cheman)\ **Post date:** [December 14, 2022, 6:58am UTC](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706/104 "2022-12-14T06:58:44Z")
I’m super excited for this… already got my order in 🙂 ---
**Author:** ![Matticustard](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/matticustard/32/9039_2.png) [@Matticustard](https://forum.onefinitycnc.com/u/Matticustard)\ **Post date:** [December 17, 2022, 10:05pm UTC](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706/105 "2022-12-17T22:05:37Z")
Does MASSO Link allow for remote E-Stop? ---
**Author:** ![ChrisS](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/chriss/32/22864_2.png) [@ChrisS](https://forum.onefinitycnc.com/u/ChrisS)\ **Post date:** [December 18, 2022, 8:53pm UTC](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706/106 "2022-12-18T20:53:49Z")
I couldn’t find anything definitive on being able to execute some of the custom inputs remotely, but I found a list of programmable inputs. The phone app looks incredibly limited, but I believe the windows app is closer to full duplication. I’m of course only going off what I can find on Google, so if in the future we determine it to be false, like you I don’t have mine in hand to answer positivity. [https://docs.masso.com.au/wiring-and-setup/setup-and-calibration/list-of-configurable-inputs](https://docs.masso.com.au/wiring-and-setup/setup-and-calibration/list-of-configurable-inputs) [Previous page](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706.md?page=4) [Next page](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706.md?page=6)