# Introducing the new Onefinity ELITE Series, Powered by MASSO

**URL:** <https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706>\
**Category:** Announcements\
**Created:** [November 25, 2022, 9:42pm UTC](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706 "2022-11-25T21:42:03Z")\
**Posts on this page:** 1\
**Showing post:** 122

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [December 30, 2022, 8:08pm UTC](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706/122 "2022-12-30T20:08:38Z")

</div>

Hey Tom, hey all,

I think if they first made a 43 mm mount [like imagined here](https://forum.onefinitycnc.com/t/43mm-euro-spindle/15188) which would allow the use of e.g. the [Mafell FM 1000 PV-ER](https://produkte.mafell.de/en/mortising/milling-motor/milling-motor-fm-1000-pv-er) with speed control interface and [true ER collet as known on spindles](https://forum.onefinitycnc.com/t/how-do-you-ensure-your-model-translates-to-reality/13579/24#the-er-collet-1), and a lot of other motors from which I imagine some are surely available in North America ([you mentioned the Stepcraft the other day](https://forum.onefinitycnc.com/t/43mm-euro-spindle/15188/26)), they would make no mistake. After all, when we are talking of [AMB (former Kress)](https://www.amb-elektrik.de/en/products/milling-motors/), the [Suhner](https://forum.onefinitycnc.com/t/machinist-in-x-50/8159/18#suhner-milling-motor-1), and the [Mafell](https://produkte.mafell.de/en/mortising/milling-motor/milling-motor-fm-1000-pv-er) milling motors, unlike the Makita, we mean highly reliable motors specifically made for CNCs. Unlike the Makita, they are not likely [to burn your workshop down](https://forum.onefinitycnc.com/t/makita-router-overload/15639) ☹. How many people come here and say, I would like to have something more reliable than a hand trim router but fear wiring a spindle/VFD – these simply to plug in milling motors would be the solution for so many.

By the way, the Z assembly you show is very much in the direction I envision. However, I would first like to determine how much twist the X tube pair has under load and how much play is in the Y bearings before deciding how close I need to stay with the spindle axis to the X axis because of the leverage.

---

_[View the full topic](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706)._