# IPP upgrade X axis settings

**URL:** <https://forum.onefinitycnc.com/t/ipp-upgrade-x-axis-settings/30097>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [December 22, 2024, 8:37pm UTC](https://forum.onefinitycnc.com/t/ipp-upgrade-x-axis-settings/30097 "2024-12-22T20:37:53Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![woodchucknc](https://avatars.discourse-cdn.com/v4/letter/w/a9a28c/32.png) [@woodchucknc](https://forum.onefinitycnc.com/u/woodchucknc)\
**Post date:** [December 22, 2024, 8:37pm UTC](https://forum.onefinitycnc.com/t/ipp-upgrade-x-axis-settings/30097/1 "2024-12-22T20:37:53Z")

</div>

I upgraded my Woodworker x axis  
To the Journeyman. Where can i find information on revising my settings to accomode the larger travel area for the 48" rail?  
Thanks!

---

<div class="post-metadata">

**Author:** ![TMToronto](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TMToronto](https://forum.onefinitycnc.com/u/TMToronto)\
**Post date:** [December 22, 2024, 8:56pm UTC](https://forum.onefinitycnc.com/t/ipp-upgrade-x-axis-settings/30097/2 "2024-12-22T20:56:17Z")

</div>

[https://forum.onefinitycnc.com/t/proper-motor-settings-for-x-50-rails-woodworker-and-journeyman-with-1616-ball-screw-configuration/7152](https://forum.onefinitycnc.com/t/proper-motor-settings-for-x-50-rails-woodworker-and-journeyman-with-1616-ball-screw-configuration/7152)