# Is your router frame a parallelogram? Mine was!

**URL:** <https://forum.onefinitycnc.com/t/is-your-router-frame-a-parallelogram-mine-was/6086>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [June 12, 2021, 6:58pm UTC](https://forum.onefinitycnc.com/t/is-your-router-frame-a-parallelogram-mine-was/6086 "2021-06-12T18:58:58Z")\
**Posts on this page:** 1\
**Showing post:** 98

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [April 24, 2024, 12:23pm UTC](https://forum.onefinitycnc.com/t/is-your-router-frame-a-parallelogram-mine-was/6086/98 "2024-04-24T12:23:05Z")

</div>

Hey CalgaryD,

- [Machine has a gap on the back side after third setup attempt](https://forum.onefinitycnc.com/t/machine-has-a-gap-on-the-back-side-after-third-setup-attempt/21525/8)
- [How to realign the Y rails (x35/x50 machines)](https://forum.onefinitycnc.com/t/how-to-realign-the-y-rails-x35-x50-machines/16494)

---

_[View the full topic](https://forum.onefinitycnc.com/t/is-your-router-frame-a-parallelogram-mine-was/6086)._