# Journeyman X50 Setup

**URL:** <https://forum.onefinitycnc.com/t/journeyman-x50-setup/8317>\
**Category:** Machine Setups\
**Created:** [October 16, 2021, 5:56pm UTC](https://forum.onefinitycnc.com/t/journeyman-x50-setup/8317 "2021-10-16T17:56:53Z")\
**Posts on this page:** 1\
**Showing post:** 15

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [October 18, 2021, 2:57am UTC](https://forum.onefinitycnc.com/t/journeyman-x50-setup/8317/15 "2021-10-18T02:57:05Z")

</div>

Hey Bob,

> [@Bob\_D](#):
>
> I have read that using the drag chain is not recommended by Onefinity. I guess because it forces the cables to run close and parallel which with poorly shielded cables would be a problem. So maybe a cable upgrade is in order.

as far as I know, they didn’t say _not recommended_, but _[not supported](https://forum.onefinitycnc.com/t/new-member-new-journeyman-drag-chains-dust-collection-spindle-grounding/8183/6)_.

Here in Germany we use this for 3-phase high-frequency spindles: [LAPP ÖLFLEX® CLASSIC FD 810 CY](https://products.lappgroup.com/online-catalogue/power-and-control-cables/power-chain-applications/various-applications/oelflex-classic-fd-810-cy.html). It has double shield and it is specially designed for use in [Power Chains](https://en.wikipedia.org/wiki/Cable_carrier). I use 4 × 1,5 mm² (3+PE) for 2.2 kW.

---

_[View the full topic](https://forum.onefinitycnc.com/t/journeyman-x50-setup/8317)._