# Joystick Quit Working

**URL:** <https://forum.onefinitycnc.com/t/joystick-quit-working/18285>\
**Category:** Accessories\
**Created:** [January 21, 2023, 12:43am UTC](https://forum.onefinitycnc.com/t/joystick-quit-working/18285 "2023-01-21T00:43:35Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Woody989](https://avatars.discourse-cdn.com/v4/letter/w/46a35a/32.png) [@Woody989](https://forum.onefinitycnc.com/u/Woody989)\
**Post date:** [January 21, 2023, 12:43am UTC](https://forum.onefinitycnc.com/t/joystick-quit-working/18285/1 "2023-01-21T00:43:35Z")

</div>

The joystick worked just fine when the blue light flashed and went out. I thought the batteries were dead so I replaced them. I tried 3 different pairs and no light. Is there a way to reset or flash it somehow so it works?

---

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [January 21, 2023, 12:54am UTC](https://forum.onefinitycnc.com/t/joystick-quit-working/18285/2 "2023-01-21T00:54:55Z")

</div>

Hey Philip,

have already consulted the [Joypad Category](https://forum.onefinitycnc.com/c/faq/joypad/42) and seen this:

- [Official Onefinity Joystick Controls (How to changes modes)](https://forum.onefinitycnc.com/t/official-onefinity-joystick-controls-how-to-changes-modes/2299)