# Jtech 14w laser post processor and tool selection

**URL:** <https://forum.onefinitycnc.com/t/jtech-14w-laser-post-processor-and-tool-selection/17555>\
**Category:** Accessories\
**Created:** [December 21, 2022, 5:37pm UTC](https://forum.onefinitycnc.com/t/jtech-14w-laser-post-processor-and-tool-selection/17555 "2022-12-21T17:37:10Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Xntryk](https://avatars.discourse-cdn.com/v4/letter/x/e480ec/32.png) [@Xntryk](https://forum.onefinitycnc.com/u/Xntryk)\
**Post date:** [December 21, 2022, 5:37pm UTC](https://forum.onefinitycnc.com/t/jtech-14w-laser-post-processor-and-tool-selection/17555/1 "2022-12-21T17:37:10Z")

</div>

I’ve watched the video by jtech on how to install the post processor for the laser and followed the instructions. When I try to select a tool after selecting a laser toolpath, the only option I get is the 3.8 w laser and the parameters to that are empty. Is there somewhere else I can get the tool database for lasers?
