# JTech 44w laser install

**URL:** <https://forum.onefinitycnc.com/t/jtech-44w-laser-install/24692>\
**Category:** Uncategorized\
**Created:** [January 14, 2024, 9:56pm UTC](https://forum.onefinitycnc.com/t/jtech-44w-laser-install/24692 "2024-01-14T21:56:56Z")\
**Posts on this page:** 13\
**Page:** 1

<div class="post-metadata">

**Author:** ![JohnD](https://avatars.discourse-cdn.com/v4/letter/j/58f4c7/32.png) [@JohnD](https://forum.onefinitycnc.com/u/JohnD)\
**Post date:** [January 14, 2024, 9:56pm UTC](https://forum.onefinitycnc.com/t/jtech-44w-laser-install/24692/1 "2024-01-14T21:56:56Z")

</div>

Hello,

First time installing a laser, I am able to fire the laser manually but cant turn it on using M3 S10 code. Also using Vetric Aspire laser module for the design. Any help would be appreciated.

Thxs  
J

---

<div class="post-metadata">

**Author:** ![DCK](https://avatars.discourse-cdn.com/v4/letter/d/7bcc69/32.png) [@DCK](https://forum.onefinitycnc.com/u/DCK)\
**Post date:** [January 14, 2024, 10:43pm UTC](https://forum.onefinitycnc.com/t/jtech-44w-laser-install/24692/2 "2024-01-14T22:43:07Z")

</div>

Which machine are you using?

If you’re using the Masso controller, you’ll need to install an updated postprocessor in Aspire to enable the laser. Not sure about the original series machines, as ive not used a laser on one of those in a couple years.

---

<div class="post-metadata">

**Author:** ![cyberlynx1](https://avatars.discourse-cdn.com/v4/letter/c/7ea924/32.png) [@cyberlynx1](https://forum.onefinitycnc.com/u/cyberlynx1)\
**Post date:** [January 14, 2024, 11:55pm UTC](https://forum.onefinitycnc.com/t/jtech-44w-laser-install/24692/4 "2024-01-14T23:55:09Z")

</div>

are you trying to turn it on to position it?

---

<div class="post-metadata">

**Author:** ![MstrODstr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/mstrodstr/32/26808_2.png) [@MstrODstr](https://forum.onefinitycnc.com/u/MstrODstr)\
**Post date:** [January 15, 2024, 12:02am UTC](https://forum.onefinitycnc.com/t/jtech-44w-laser-install/24692/5 "2024-01-15T00:02:34Z")

</div>

try slightly higher S values…mine doesn’t come on until I’m at S20 or so.

---

<div class="post-metadata">

**Author:** ![JohnD](https://avatars.discourse-cdn.com/v4/letter/j/58f4c7/32.png) [@JohnD](https://forum.onefinitycnc.com/u/JohnD)\
**Post date:** [January 15, 2024, 1:07am UTC](https://forum.onefinitycnc.com/t/jtech-44w-laser-install/24692/6 "2024-01-15T01:07:28Z")

</div>

Hi cyberlynx1  
Yes, everything is connected. I can switch the laser on manually and it burns the wood. But cant use the M3 S10 or M3 S50 to make it come on.  
J

---

<div class="post-metadata">

**Author:** ![JohnD](https://avatars.discourse-cdn.com/v4/letter/j/58f4c7/32.png) [@JohnD](https://forum.onefinitycnc.com/u/JohnD)\
**Post date:** [January 15, 2024, 1:10am UTC](https://forum.onefinitycnc.com/t/jtech-44w-laser-install/24692/7 "2024-01-15T01:10:19Z")

</div>

Hi MstrODstr,

I can switch the laser on manually and it burns the wood. But cant use the M3 S10 or M3 S50 to make it come on so I can home it.

Also tried just running a file and the file ran but the laser never came on.  
J

---

<div class="post-metadata">

**Author:** ![Hermsen.BJ](https://avatars.discourse-cdn.com/v4/letter/h/779978/32.png) [@Hermsen.BJ](https://forum.onefinitycnc.com/u/Hermsen.BJ)\
**Post date:** [January 15, 2024, 1:12am UTC](https://forum.onefinitycnc.com/t/jtech-44w-laser-install/24692/8 "2024-01-15T01:12:45Z")

</div>

Did you press the reset button on the jtech controller? It should arm the laser and turn on the fan and leds on the boards

---

<div class="post-metadata">

**Author:** ![JohnD](https://avatars.discourse-cdn.com/v4/letter/j/58f4c7/32.png) [@JohnD](https://forum.onefinitycnc.com/u/JohnD)\
**Post date:** [January 15, 2024, 1:20am UTC](https://forum.onefinitycnc.com/t/jtech-44w-laser-install/24692/9 "2024-01-15T01:20:49Z")

</div>

Hi Dan,

Im using a old woodworker with 80mm spindle.  
like i said I can switch the laser on manually and it burns the wood. But cant use the M3 S10 or M3 S50 to make it come on.

J

---

<div class="post-metadata">

**Author:** ![JohnD](https://avatars.discourse-cdn.com/v4/letter/j/58f4c7/32.png) [@JohnD](https://forum.onefinitycnc.com/u/JohnD)\
**Post date:** [January 15, 2024, 1:23am UTC](https://forum.onefinitycnc.com/t/jtech-44w-laser-install/24692/10 "2024-01-15T01:23:31Z")

</div>

Hi Hermsen.BJ,  
Yes several times, even turned up the potentiometer thought maybe it was to low.  
J

---

<div class="post-metadata">

**Author:** ![msharp](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/msharp/32/2663_2.png) [@msharp](https://forum.onefinitycnc.com/u/msharp)\
**Post date:** [January 15, 2024, 5:58am UTC](https://forum.onefinitycnc.com/t/jtech-44w-laser-install/24692/11 "2024-01-15T05:58:21Z")

</div>

In the tool setting did you set it to laser instead of router

---

<div class="post-metadata">

**Author:** ![JohnD](https://avatars.discourse-cdn.com/v4/letter/j/58f4c7/32.png) [@JohnD](https://forum.onefinitycnc.com/u/JohnD)\
**Post date:** [January 15, 2024, 2:26pm UTC](https://forum.onefinitycnc.com/t/jtech-44w-laser-install/24692/12 "2024-01-15T14:26:33Z")

</div>

Hi msharp,  
I saved the file using the laser post-processor, is there another setting somewhere?  
Thxs  
J

---

<div class="post-metadata">

**Author:** ![Hermsen.BJ](https://avatars.discourse-cdn.com/v4/letter/h/779978/32.png) [@Hermsen.BJ](https://forum.onefinitycnc.com/u/Hermsen.BJ)\
**Post date:** [January 15, 2024, 3:28pm UTC](https://forum.onefinitycnc.com/t/jtech-44w-laser-install/24692/13 "2024-01-15T15:28:21Z")

</div>

in the onefinity controller itself under tool menu

---

<div class="post-metadata">

**Author:** ![JohnD](https://avatars.discourse-cdn.com/v4/letter/j/58f4c7/32.png) [@JohnD](https://forum.onefinitycnc.com/u/JohnD)\
**Post date:** [January 15, 2024, 3:59pm UTC](https://forum.onefinitycnc.com/t/jtech-44w-laser-install/24692/14 "2024-01-15T15:59:57Z")

</div>

Hi Hermsen.BJ,  
I’m such a nut, didn’t dawn on me to change the tool, it works fine now 🙂  
Thxs  
J
