# Jtech laser offset

**URL:** <https://forum.onefinitycnc.com/t/jtech-laser-offset/1815>\
**Category:** J Tech Laser\
**Created:** [November 29, 2020, 6:11am UTC](https://forum.onefinitycnc.com/t/jtech-laser-offset/1815 "2020-11-29T06:11:49Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bcadet](https://avatars.discourse-cdn.com/v4/letter/b/2bfe46/32.png) [@Bcadet](https://forum.onefinitycnc.com/u/Bcadet)\
**Post date:** [November 29, 2020, 6:11am UTC](https://forum.onefinitycnc.com/t/jtech-laser-offset/1815/1 "2020-11-29T06:11:49Z")

</div>

Does anyone know the laser offset?

Thank you,  
B

---

<div class="post-metadata">

**Author:** ![Bcadet](https://avatars.discourse-cdn.com/v4/letter/b/2bfe46/32.png) [@Bcadet](https://forum.onefinitycnc.com/u/Bcadet)\
**Post date:** [November 29, 2020, 8:16am UTC](https://forum.onefinitycnc.com/t/jtech-laser-offset/1815/2 "2020-11-29T08:16:35Z")

</div>

I actually measured the offset. But I guess it will only work for me. Anyhow here is what I found : deltaX = -1.5mm and deltaY = -79.5mm

 ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/4/3/43c0896d04f5932f7600d432490328fe8499aae1.jpeg)

---

<div class="post-metadata">

**Author:** ![laynemims](https://avatars.discourse-cdn.com/v4/letter/l/258eb7/32.png) [@laynemims](https://forum.onefinitycnc.com/u/laynemims)\
**Post date:** [November 30, 2020, 4:30pm UTC](https://forum.onefinitycnc.com/t/jtech-laser-offset/1815/3 "2020-11-30T16:30:08Z")

</div>

mine was -.05 in x, and - 2.75 in for y

Layne mims

---

<div class="post-metadata">

**Author:** ![GregoryG](https://avatars.discourse-cdn.com/v4/letter/g/97f17d/32.png) [@GregoryG](https://forum.onefinitycnc.com/u/GregoryG)\
**Post date:** [April 24, 2021, 9:40pm UTC](https://forum.onefinitycnc.com/t/jtech-laser-offset/1815/4 "2021-04-24T21:40:46Z")

</div>

How do we find the offset, please

---

<div class="post-metadata">

**Author:** ![Bcadet](https://avatars.discourse-cdn.com/v4/letter/b/2bfe46/32.png) [@Bcadet](https://forum.onefinitycnc.com/u/Bcadet)\
**Post date:** [April 24, 2021, 11:06pm UTC](https://forum.onefinitycnc.com/t/jtech-laser-offset/1815/5 "2021-04-24T23:06:50Z")

</div>

Hi Gregory,  
Basically when you laser is attached, you home your machine and then you fire the laser. Second you move your router to the laser spot left and look on the screen the displacement.  
Hope it helps.  
B.

---

<div class="post-metadata">

**Author:** ![BLACKHAT](https://avatars.discourse-cdn.com/v4/letter/b/db5fbb/32.png) [@BLACKHAT](https://forum.onefinitycnc.com/u/BLACKHAT)\
**Post date:** [July 3, 2021, 8:37pm UTC](https://forum.onefinitycnc.com/t/jtech-laser-offset/1815/6 "2021-07-03T20:37:24Z")

</div>

how do you accommodate for the offset in you g code? 0 X and y then set the offset as your 0? this off set should be relatively consistent due to the mounts being the same? or is that taken into account when using the laser module in Vectric program.

---

<div class="post-metadata">

**Author:** ![GoodTimberDesign](https://avatars.discourse-cdn.com/v4/letter/g/85e7bf/32.png) [@GoodTimberDesign](https://forum.onefinitycnc.com/u/GoodTimberDesign)\
**Post date:** [October 1, 2021, 10:05pm UTC](https://forum.onefinitycnc.com/t/jtech-laser-offset/1815/7 "2021-10-01T22:05:05Z")

</div>

What Bcadet said was perfect. I made a video showing how to do this before seeing his solution. Here’s a video I made where I went through the process: [How to find the exact offset of your J-Tech laser on your CNC machine - Easy! - YouTube](https://www.youtube.com/watch?v=cBLcbzgtJEs)

---

<div class="post-metadata">

**Author:** ![Clayton](https://avatars.discourse-cdn.com/v4/letter/c/f9ae1b/32.png) [@Clayton](https://forum.onefinitycnc.com/u/Clayton)\
**Post date:** [December 13, 2021, 4:59am UTC](https://forum.onefinitycnc.com/t/jtech-laser-offset/1815/8 "2021-12-13T04:59:15Z")

</div>

Thanks for the video. It there a way to save the laser zero?

---

<div class="post-metadata">

**Author:** ![stuckinohio](https://avatars.discourse-cdn.com/v4/letter/s/96bed5/32.png) [@stuckinohio](https://forum.onefinitycnc.com/u/stuckinohio)\
**Post date:** [January 26, 2025, 4:47am UTC](https://forum.onefinitycnc.com/t/jtech-laser-offset/1815/9 "2025-01-26T04:47:28Z")

</div>

Bumping this. Kudos to @Bcadet and @GoodTimberDesign

After establishing the offset, what’s the easiest way to account for this? I suppose I can simply use the joypad to the correct offsets but seems fidgety?
