# JTech laser post processer

**URL:** <https://forum.onefinitycnc.com/t/jtech-laser-post-processer/5752>\
**Category:** J Tech Laser\
**Created:** [May 26, 2021, 4:24am UTC](https://forum.onefinitycnc.com/t/jtech-laser-post-processer/5752 "2021-05-26T04:24:43Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tlcrab44](https://avatars.discourse-cdn.com/v4/letter/t/74df32/32.png) [@Tlcrab44](https://forum.onefinitycnc.com/u/Tlcrab44)\
**Post date:** [May 26, 2021, 4:24am UTC](https://forum.onefinitycnc.com/t/jtech-laser-post-processer/5752/1 "2021-05-26T04:24:43Z")

</div>

When I downloaded the Onefinity post processor for vertical, but when I go to the tool database all I see is 3.8w and 6w, no 7w.

---

<div class="post-metadata">

**Author:** ![Hobbes443](https://avatars.discourse-cdn.com/v4/letter/h/b9e5f3/32.png) [@Hobbes443](https://forum.onefinitycnc.com/u/Hobbes443)\
**Post date:** [May 26, 2021, 4:32pm UTC](https://forum.onefinitycnc.com/t/jtech-laser-post-processer/5752/2 "2021-05-26T16:32:43Z")

</div>

Not exactly sure what you are asking. The post processor is for saving your tool path as .gcode only. The (I’m assuming you mean Vectric) tool database is independent of that and needs to be setup manually.

If you scroll down this page from jtech: [https://jtechphotonics.com/?page\_id=20454](https://jtechphotonics.com/?page_id=20454) You’ll find a screen shot of the proper Laser tool to setup for their laser. Create a new tool and copy those settings.
