# Jtech use for engraving hard and soft wood

**URL:** <https://forum.onefinitycnc.com/t/jtech-use-for-engraving-hard-and-soft-wood/9579>\
**Category:** Uncategorized\
**Created:** [December 16, 2021, 3:13pm UTC](https://forum.onefinitycnc.com/t/jtech-use-for-engraving-hard-and-soft-wood/9579 "2021-12-16T15:13:14Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![CSM](https://avatars.discourse-cdn.com/v4/letter/c/58f4c7/32.png) [@CSM](https://forum.onefinitycnc.com/u/CSM)\
**Post date:** [December 16, 2021, 3:13pm UTC](https://forum.onefinitycnc.com/t/jtech-use-for-engraving-hard-and-soft-wood/9579/1 "2021-12-16T15:13:14Z")

</div>

Hi All  
I have several projects that i need to use the Jtech laser to add text and logo’s  
When I first purchased The Onefinity and Jtech I downloaded Lightburn which i found fairly simple to use, did struggle with a few settings regarding power and feeds  
The trail of my Lightburn has expired and i am now undecided as to what the best way forward is  
Do i bit the bullet and purchase Lightburn on a yearly basis?  
I have Carveco Maker on subscription which I find great for all my carving needs does anyone if Maker will produce code to enable the Onefinity to laser engrave, i have spent hours search forums, support communities, youtube etc but cant find any answer, I have a support request in with Carveco but as yet no heard anything

Any help or advice would be great

Cheers

---

<div class="post-metadata">

**Author:** ![Kat](https://avatars.discourse-cdn.com/v4/letter/k/b19c9b/32.png) [@Kat](https://forum.onefinitycnc.com/u/Kat)\
**Post date:** [December 16, 2021, 3:47pm UTC](https://forum.onefinitycnc.com/t/jtech-use-for-engraving-hard-and-soft-wood/9579/2 "2021-12-16T15:47:13Z")

</div>

For me, I like Lightburn. I just renewed it earlier this month for the updates. I use Vetric and have the laser module (plug in) for it, I find that most times it’s just easier for me to run Lightburn. Please keep in mind this is also because I am lazy, and really need to set up a speed/power test with the Vetric module.  
Oh, and so far for whatever reason, running the same file with the Vetric laser module and Lightburn, I get better results from Lightburn running the same speed and power. I really need to play around and figure that one out. lol.