# "Jump To" not implemented? (Solved in firmware 1.4.18!) **URL:** \ **Category:** Bugs\ **Created:** [November 5, 2025, 9:49pm UTC](https://forum.onefinitycnc.com/t/jump-to-not-implemented-solved-in-firmware-1-4-18/36123 "2025-11-05T21:49:04Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![tgunr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/tgunr/32/10947_2.png) [@tgunr](https://forum.onefinitycnc.com/u/tgunr)\ **Post date:** [November 5, 2025, 9:49pm UTC](https://forum.onefinitycnc.com/t/jump-to-not-implemented-solved-in-firmware-1-4-18/36123/1 "2025-11-05T21:49:04Z")
The Elite Series with @Redlinecnc Controller The Jump To feature seems to be unimplemented, is that correct? When I try setting to a line just before tool change I see “Restoring Machine State” “Raising Tool” but nothing happens and I hit Abort to user aborted alert. ---
**Author:** ![RTCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/rtcnc/32/33487_2.png) [@RTCNC](https://forum.onefinitycnc.com/u/RTCNC)\ **Post date:** [November 6, 2025, 5:49pm UTC](https://forum.onefinitycnc.com/t/jump-to-not-implemented-solved-in-firmware-1-4-18/36123/2 "2025-11-06T17:49:28Z")
> [@Redline Controller Install walkthrough video](https://forum.onefinitycnc.com/t/redline-controller-install-walkthrough-video/35507/19): > > The jump to line bug is a known issue. We’re trying to get it fixed for the next release (1.1.2). Just adding this reference from the installation video discussion. ---
**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Post date:** [March 27, 2026, 3:36pm UTC](https://forum.onefinitycnc.com/t/jump-to-not-implemented-solved-in-firmware-1-4-18/36123/3 "2026-03-27T15:36:51Z")
Solved in firmware 1.4.18!