# Just a fun unboxing video from a newbie

**URL:** <https://forum.onefinitycnc.com/t/just-a-fun-unboxing-video-from-a-newbie/38219>\
**Category:** Gen 2 Elite Series\
**Created:** [April 19, 2026, 8:04pm UTC](https://forum.onefinitycnc.com/t/just-a-fun-unboxing-video-from-a-newbie/38219 "2026-04-19T20:04:58Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rumor](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/rumor/32/35148_2.png) [@Rumor](https://forum.onefinitycnc.com/u/Rumor)\
**Post date:** [April 19, 2026, 8:04pm UTC](https://forum.onefinitycnc.com/t/just-a-fun-unboxing-video-from-a-newbie/38219/1 "2026-04-19T20:04:58Z")

</div>

Had everything for 1.5 weeks. Finally getting the time to open it. Its honestly a bit emotional. Big plans, and so exciting.

---

<div class="post-metadata">

**Author:** ![Woodpecker](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/woodpecker/32/27447_2.png) [@Woodpecker](https://forum.onefinitycnc.com/u/Woodpecker)\
**Post date:** [April 19, 2026, 8:53pm UTC](https://forum.onefinitycnc.com/t/just-a-fun-unboxing-video-from-a-newbie/38219/2 "2026-04-19T20:53:08Z")

</div>

I do not see any “unboxing”

---

<div class="post-metadata">

**Author:** ![Rumor](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/rumor/32/35148_2.png) [@Rumor](https://forum.onefinitycnc.com/u/Rumor)\
**Post date:** [April 19, 2026, 10:10pm UTC](https://forum.onefinitycnc.com/t/just-a-fun-unboxing-video-from-a-newbie/38219/3 "2026-04-19T22:10:39Z")

</div>

true…it was just the boxing.

---

<div class="post-metadata">

**Author:** ![Rumor](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/rumor/32/35148_2.png) [@Rumor](https://forum.onefinitycnc.com/u/Rumor)\
**Post date:** [April 19, 2026, 10:43pm UTC](https://forum.onefinitycnc.com/t/just-a-fun-unboxing-video-from-a-newbie/38219/4 "2026-04-19T22:43:23Z")

</div>

Some actual unboxing photos and 3d printed stuff to get ready?

 ![9dde08d0-3d41-4219-a9bd-b214e497938b](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/e/1/e1fcd35049754ab4384fdc15c4fb0406753d0533.jpeg)

 ![75414457-26a6-4bb6-9a91-cfe76f4d94bd](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/6/6/666c77bf8d9a56ee5a594141dbc368ed5f4a7704.jpeg)

 ![d4a194be-68b2-4964-a803-f5b403508765](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/3/e/3ee6d2d03970650e1c0c233eed585f780dcd0d92.jpeg)

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [May 19, 2026, 4:30am UTC](https://forum.onefinitycnc.com/t/just-a-fun-unboxing-video-from-a-newbie/38219/5 "2026-05-19T04:30:47Z")

</div>

Will we get to see some shots of it out together?!