# Just finished CNC enclosure **URL:** \ **Category:** Gallery\ **Created:** [July 2, 2021, 11:40pm UTC](https://forum.onefinitycnc.com/t/just-finished-cnc-enclosure/6504 "2021-07-02T23:40:24Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![SteveS](https://avatars.discourse-cdn.com/v4/letter/s/49beb7/32.png) [@SteveS](https://forum.onefinitycnc.com/u/SteveS)\ **Post date:** [July 2, 2021, 11:40pm UTC](https://forum.onefinitycnc.com/t/just-finished-cnc-enclosure/6504/1 "2021-07-02T23:40:25Z")
Hey guys, here is my (almost) finished 1F enclosure I have a dedicated cubby for the shop vac with a cyclone separator that keeps the noise down considerably. The enclosure is made entirely out of BeetleKill Pine- I rescued if from being thrown out at work. The window is a quarter inch acrylic and the lights are LED strip lights - I made my connections with solder and wire to get them to where I wanted them The door is held up on by a simple pulley system that makes it one handed. I used old weights so I could adjust the weight desired by simply manipulating the plates. I bought some gas struts but got the wrong brackets and became frustrated after about an hour and gave up. Lol. T track hold downs. Suck it dust boot. Drawers for all the accessories. Simple screen mount. Haven’t figured out what I want to do with the controller yet so that’s why that’s on a milk crate currently Thanks for checking it out ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/3/e/3e38a60c03cc1ee9f4b32843c166c5dd8b95d8de.jpeg) ---
**Author:** ![SteveS](https://avatars.discourse-cdn.com/v4/letter/s/49beb7/32.png) [@SteveS](https://forum.onefinitycnc.com/u/SteveS)\ **Post date:** [July 2, 2021, 11:41pm UTC](https://forum.onefinitycnc.com/t/just-finished-cnc-enclosure/6504/2 "2021-07-02T23:41:31Z")
I’m only allowed one pic per post, so here is another ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/4/f/4fa8a28c09fdb8fea1037b47cce83a9ada046d1c.jpeg) ---
**Author:** ![cyberreefguru](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/cyberreefguru/32/27385_2.png) [@cyberreefguru](https://forum.onefinitycnc.com/u/cyberreefguru)\ **Post date:** [July 9, 2021, 5:36pm UTC](https://forum.onefinitycnc.com/t/just-finished-cnc-enclosure/6504/3 "2021-07-09T17:36:46Z")
Nice work Steve - love the weathered wood. ---
**Author:** ![Techrise](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/techrise/32/2402_2.png) [@Techrise](https://forum.onefinitycnc.com/u/Techrise)\ **Post date:** [July 17, 2021, 9:42pm UTC](https://forum.onefinitycnc.com/t/just-finished-cnc-enclosure/6504/4 "2021-07-17T21:42:50Z")
Where did you end up putting your screen at? ---
**Author:** ![SteveS](https://avatars.discourse-cdn.com/v4/letter/s/49beb7/32.png) [@SteveS](https://forum.onefinitycnc.com/u/SteveS)\ **Post date:** [July 18, 2021, 4:12pm UTC](https://forum.onefinitycnc.com/t/just-finished-cnc-enclosure/6504/5 "2021-07-18T16:12:56Z")
I just mounted it on my garage wall outside of the enclosure ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/2/206e35a273b84f4cca966137d95eb674fe4cf2aa.jpeg) ---
**Author:** ![SteveS](https://avatars.discourse-cdn.com/v4/letter/s/49beb7/32.png) [@SteveS](https://forum.onefinitycnc.com/u/SteveS)\ **Post date:** [July 18, 2021, 4:14pm UTC](https://forum.onefinitycnc.com/t/just-finished-cnc-enclosure/6504/6 "2021-07-18T16:14:20Z")
Thank you I do construction and this was all shipping crates for some giant water heaters. They were going to throw it all out and upon looking at it further - I realized it was all BeetleKill Pine ---
**Author:** ![MrZoolittle](https://avatars.discourse-cdn.com/v4/letter/m/a3d4f5/32.png) [@MrZoolittle](https://forum.onefinitycnc.com/u/MrZoolittle)\ **Post date:** [July 21, 2021, 9:54am UTC](https://forum.onefinitycnc.com/t/just-finished-cnc-enclosure/6504/7 "2021-07-21T09:54:25Z")
What is the black material on the inside? Is it for sound deadening? ---
**Author:** ![SteveS](https://avatars.discourse-cdn.com/v4/letter/s/49beb7/32.png) [@SteveS](https://forum.onefinitycnc.com/u/SteveS)\ **Post date:** [July 21, 2021, 1:49pm UTC](https://forum.onefinitycnc.com/t/just-finished-cnc-enclosure/6504/8 "2021-07-21T13:49:53Z")
Yes. It’s 1/2” thick rubberized foam. It does a great job at making this real quiet ---
**Author:** ![Jaydn](https://avatars.discourse-cdn.com/v4/letter/j/a9a28c/32.png) [@Jaydn](https://forum.onefinitycnc.com/u/Jaydn)\ **Post date:** [July 26, 2021, 2:12pm UTC](https://forum.onefinitycnc.com/t/just-finished-cnc-enclosure/6504/9 "2021-07-26T14:12:01Z")
Cool invention! I need to save the idea for future.