# Laser pointer mount

**URL:** <https://forum.onefinitycnc.com/t/laser-pointer-mount/7123>\
**Category:** Accessories\
**Created:** [August 8, 2021, 6:57pm UTC](https://forum.onefinitycnc.com/t/laser-pointer-mount/7123 "2021-08-08T18:57:30Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![white\_fox](https://avatars.discourse-cdn.com/v4/letter/w/e95f7d/32.png) [@white\_fox](https://forum.onefinitycnc.com/u/white_fox)\
**Post date:** [August 8, 2021, 6:57pm UTC](https://forum.onefinitycnc.com/t/laser-pointer-mount/7123/1 "2021-08-08T18:57:30Z")

</div>

Anyone know of a laser pointer attachment so I can align my bits with an exact point on my project? Thanks in advance.

---

<div class="post-metadata">

**Author:** ![alden](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/alden/32/161_2.png) [@alden](https://forum.onefinitycnc.com/u/alden)\
**Post date:** [August 8, 2021, 8:03pm UTC](https://forum.onefinitycnc.com/t/laser-pointer-mount/7123/2 "2021-08-08T20:03:17Z")

</div>

If you have the JTech laser you can fire a direct no burn focused beam under MDI. There are steps to follow for this to happen.

---

<div class="post-metadata">

**Author:** ![JimHatch](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/jimhatch/32/3928_2.png) [@JimHatch](https://forum.onefinitycnc.com/u/JimHatch)\
**Post date:** [August 8, 2021, 9:14pm UTC](https://forum.onefinitycnc.com/t/laser-pointer-mount/7123/3 "2021-08-08T21:14:13Z")

</div>

> [@white\_fox](#):
>
> Anyone know of a laser pointer attachment so I can align my bits with an exact point on my project

You can get a couple of these.

[https://www.ebay.com/itm/Focusable-830nm-300mW-Infrared-Laser-Dot-Module-with-Adapter-with-Bracket-/261209328811?mkcid=16&mkevt=1&\_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0](https://www.ebay.com/itm/Focusable-830nm-300mW-Infrared-Laser-Dot-Module-with-Adapter-with-Bracket-/261209328811?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0)

They’re similar to what I put on my CNC plasma. You’ll need to get rid of the bottom plate and perhaps tap a hole directly into the spindle mount or fab up a 3D printed part that you can mount the adjustable arm to.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/b/bcd889042169c0a95b6300991f09a8f7f66c86a3.jpeg)

Or if you want to fab up a full setup here’s a source for just laser pointers you could use.

[https://www.amazon.ca/WayinTop-Adjustable-Positioning-Sighting-Telescope/dp/B07ZNKTCLQ/ref=sr\_1\_3?crid=29QEJ14YFZPS2&dchild=1&keywords=laser+line+pointer&qid=1607011638&sprefix=laser+line%2Caps%2C181&sr=8-3&ref\_=d6k\_applink\_bb\_marketplace](https://www.amazon.ca/WayinTop-Adjustable-Positioning-Sighting-Telescope/dp/B07ZNKTCLQ/ref=sr_1_3?tag=benjmyers0f-20)

 ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/e/8/e829fb86ec4eb02bb9366986dbc46d533a188e9c.jpeg)

In either case you’ll need a small battery source (I’d go with a couple of small 3V lithium coin cells & mount it on the Z carriage.

---

<div class="post-metadata">

**Author:** ![white\_fox](https://avatars.discourse-cdn.com/v4/letter/w/e95f7d/32.png) [@white\_fox](https://forum.onefinitycnc.com/u/white_fox)\
**Post date:** [August 9, 2021, 1:31am UTC](https://forum.onefinitycnc.com/t/laser-pointer-mount/7123/4 "2021-08-09T01:31:13Z")

</div>

Thank you guys. I’ll do some more research into it. Just looking to mount a dot laser so I can align it with a specific starting point on projects.

---

<div class="post-metadata">

**Author:** ![alden](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/alden/32/161_2.png) [@alden](https://forum.onefinitycnc.com/u/alden)\
**Post date:** [August 9, 2021, 6:24pm UTC](https://forum.onefinitycnc.com/t/laser-pointer-mount/7123/5 "2021-08-09T18:24:45Z")

</div>

How do you plan to do that? The dot laser isn’t going to line up with the Jtech laser.

---

<div class="post-metadata">

**Author:** ![TheyCallMeJohn](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/theycallmejohn/32/7657_2.png) [@TheyCallMeJohn](https://forum.onefinitycnc.com/u/TheyCallMeJohn)\
**Post date:** [August 9, 2021, 10:30pm UTC](https://forum.onefinitycnc.com/t/laser-pointer-mount/7123/6 "2021-08-09T22:30:08Z")

</div>

Do you have a 3D Printer?

> **[Openbuilds Laser Mount by TwoToolDesigns](https://www.thingiverse.com/thing:4919465)**
>
> Designed Laser mount for the Openbuilds CNC with a Dewalt Router. Helps align your work pieces to the router. Easily take it off before your next job. 
> I print most of my parts in with a .8mm nozzle. Infill around 12%. 
> Here are the lasers I used...

---

<div class="post-metadata">

**Author:** ![white\_fox](https://avatars.discourse-cdn.com/v4/letter/w/e95f7d/32.png) [@white\_fox](https://forum.onefinitycnc.com/u/white_fox)\
**Post date:** [August 10, 2021, 2:04am UTC](https://forum.onefinitycnc.com/t/laser-pointer-mount/7123/7 "2021-08-10T02:04:54Z")

</div>

Nope i don’t have a 3d printer…

---

<div class="post-metadata">

**Author:** ![white\_fox](https://avatars.discourse-cdn.com/v4/letter/w/e95f7d/32.png) [@white\_fox](https://forum.onefinitycnc.com/u/white_fox)\
**Post date:** [August 10, 2021, 2:06am UTC](https://forum.onefinitycnc.com/t/laser-pointer-mount/7123/8 "2021-08-10T02:06:21Z")

</div>

Its not for a laser. It’s so I can align my router up with specific points of a project…
