# Learn your cnc course update **URL:** \ **Category:** Uncategorized\ **Created:** [May 31, 2023, 8:28pm UTC](https://forum.onefinitycnc.com/t/learn-your-cnc-course-update/20828 "2023-05-31T20:28:26Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![HardtailSr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/hardtailsr/32/35326_2.png) [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)\ **Post date:** [May 31, 2023, 8:28pm UTC](https://forum.onefinitycnc.com/t/learn-your-cnc-course-update/20828/1 "2023-05-31T20:28:26Z")
I am taking the learn your cnc course and wow. I am learning it . so far i am passing the quizzes they give at the end of each section. i am even learning new things about stuff i have already been using. It seems very thorough. and so far worth the money. I would lov eto talk to others who are taking or have taken the course. ---
**Author:** ![SailorMike](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/sailormike/32/3290_2.png) [@SailorMike](https://forum.onefinitycnc.com/u/SailorMike)\ **Post date:** [May 31, 2023, 9:42pm UTC](https://forum.onefinitycnc.com/t/learn-your-cnc-course-update/20828/2 "2023-05-31T21:42:01Z")
I haven’t signed up for the course, but I did sign up for his newsletter. I’ve been doing CNC for a while now, but I never fail to learn something from the newsletter video or his copious YouTube catalog. ---
**Author:** ![Svorhees](https://avatars.discourse-cdn.com/v4/letter/s/7993a0/32.png) [@Svorhees](https://forum.onefinitycnc.com/u/Svorhees)\ **Post date:** [May 31, 2023, 10:59pm UTC](https://forum.onefinitycnc.com/t/learn-your-cnc-course-update/20828/3 "2023-05-31T22:59:46Z")
We’re is this course, I am newbie and could use it. ---
**Author:** ![HardtailSr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/hardtailsr/32/35326_2.png) [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)\ **Post date:** [June 1, 2023, 9:49pm UTC](https://forum.onefinitycnc.com/t/learn-your-cnc-course-update/20828/4 "2023-06-01T21:49:06Z")
ok I am finally done with level one in the learn your cnc course and passed my quizzes. on to level 2 of seven ---
**Author:** ![HardtailSr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/hardtailsr/32/35326_2.png) [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)\ **Post date:** [June 1, 2023, 10:05pm UTC](https://forum.onefinitycnc.com/t/learn-your-cnc-course-update/20828/5 "2023-06-01T22:05:52Z")
go to learn your [cnc.com](http://cnc.com) itis a great course and not too expensive .In fact i will probably save money in time and broken bits. lol ---
**Author:** ![CandL](https://avatars.discourse-cdn.com/v4/letter/c/d26b3c/32.png) [@CandL](https://forum.onefinitycnc.com/u/CandL)\ **Post date:** [June 6, 2023, 10:50am UTC](https://forum.onefinitycnc.com/t/learn-your-cnc-course-update/20828/6 "2023-06-06T10:50:44Z")
I too am taking a course … only mine is at a community college. In the USA most colleges/universities offer FREE course to people over 60. I do have to pay a lab fees etc. But I am running Haas CNCs. I will admit it is focused on metals, but I am learnig a LOT about GCode an feel much better about comparing the Buildbotics to the Masso controller. ---
**Author:** ![polylawman](https://avatars.discourse-cdn.com/v4/letter/p/34f0e0/32.png) [@polylawman](https://forum.onefinitycnc.com/u/polylawman)\ **Post date:** [June 6, 2023, 2:57pm UTC](https://forum.onefinitycnc.com/t/learn-your-cnc-course-update/20828/7 "2023-06-06T14:57:13Z")
Your link takes me to a webpage that says “Coming soon”. ---
**Author:** ![lflaharty](https://avatars.discourse-cdn.com/v4/letter/l/ecae2f/32.png) [@lflaharty](https://forum.onefinitycnc.com/u/lflaharty)\ **Post date:** [June 7, 2023, 4:06pm UTC](https://forum.onefinitycnc.com/t/learn-your-cnc-course-update/20828/8 "2023-06-07T16:06:25Z")
Try [https://www.learnyourcnc.com/](https://www.learnyourcnc.com/) That should get you there. ---
**Author:** ![HardtailSr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/hardtailsr/32/35326_2.png) [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)\ **Post date:** [June 15, 2023, 12:19pm UTC](https://forum.onefinitycnc.com/t/learn-your-cnc-course-update/20828/9 "2023-06-15T12:19:03Z")
hello fellow learners. I have not been doing the course this past week due to having cataract surgery on my right. eye Next week I get my left one done and suddenly I will be far sighted instead of near sighted LOL so Then I get new glasses (or reading) but then I will be back on the course.