# Leveling the rolling-folding stand **URL:** \ **Category:** Quick Change Wasteboard Frame\ **Created:** [May 1, 2022, 2:41pm UTC](https://forum.onefinitycnc.com/t/leveling-the-rolling-folding-stand/12818 "2022-05-01T14:41:28Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![ben](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/ben/32/1298_2.png) [@ben](https://forum.onefinitycnc.com/u/ben)\ **Post date:** [May 1, 2022, 2:41pm UTC](https://forum.onefinitycnc.com/t/leveling-the-rolling-folding-stand/12818/1 "2022-05-01T14:41:28Z")
I’ll be moving shortly and the new shop will still be small but I will have a dedicated storage area in a second room. I am considering the rolling stand, to be able to free floor space in the working room when not using the 1F. So I’m wondering… is there a levelling feature of some sort on the rolling stand? ---
**Author:** ![Borgorl](https://avatars.discourse-cdn.com/v4/letter/b/87869e/32.png) [@Borgorl](https://forum.onefinitycnc.com/u/Borgorl)\ **Post date:** [May 1, 2022, 4:11pm UTC](https://forum.onefinitycnc.com/t/leveling-the-rolling-folding-stand/12818/2 "2022-05-01T16:11:10Z")
I got the rolling stand and qcw frame a couple months ago and didn’t level it, just set it up and have had great results ---
**Author:** ![ben](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/ben/32/1298_2.png) [@ben](https://forum.onefinitycnc.com/u/ben)\ **Post date:** [May 1, 2022, 5:29pm UTC](https://forum.onefinitycnc.com/t/leveling-the-rolling-folding-stand/12818/3 "2022-05-01T17:29:41Z")
Thanks, but I’m not sure the floor in the new place is very level ☹ ---
**Author:** ![bourri](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/bourri/32/2380_2.png) [@bourri](https://forum.onefinitycnc.com/u/bourri)\ **Post date:** [August 1, 2022, 2:52am UTC](https://forum.onefinitycnc.com/t/leveling-the-rolling-folding-stand/12818/4 "2022-08-01T02:52:09Z")
I had to add some wood blocks to level it cause my floor was not even