# Lightburn Device Profiles For All Series

**URL:** https://forum.onefinitycnc.com/t/lightburn-device-profiles-for-all-series/11585
**Category:** Laser
**Created:** [March 1, 2022, 6:29pm UTC](https://forum.onefinitycnc.com/t/lightburn-device-profiles-for-all-series/11585 "2022-03-01T18:29:37Z")
**Posts on this page:** 1
**Showing post:** 1

<div class="post-metadata">

### Author: ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)
#### Post date: [March 1, 2022, 6:29pm UTC](https://forum.onefinitycnc.com/t/lightburn-device-profiles-for-all-series/11585/1 "2022-03-01T18:29:37Z")

</div>

# Lightburn Device Profiles.

Use the following to set up your laser in Lightburn.  
Under ‘devices’ page, click import. Then select your corresponding size.

## Redline/Realtime Controller (Gen 2/Gen 1 using Realtime Controller / Redline HMI & Apprentice)

- Apprentice | [Apprentice Redline.lbzip](https://forum.onefinitycnc.com/uploads/short-url/2EXjVuKSVfoZeG2iZ6N93nG9y2D.lbzip) (1001 Bytes)

- Woodworker | [Gen 2 Elite Redline Woodworker.lbzip](https://forum.onefinitycnc.com/uploads/short-url/gLPrn0PZUlCJU6D0lD9Eu78zN4T.lbzip) (1018 Bytes)

- Journeyman |[Gen 2 Elite Redline Journeyman.lbzip](https://forum.onefinitycnc.com/uploads/short-url/2QnjSXamM9m12H9E6TLzldMtIRB.lbzip) (1.0 KB)

- Foreman | [Gen 2 Elite Redline Foreman.lbzip](https://forum.onefinitycnc.com/uploads/short-url/6kfZ1zls9cAmru9CS9NCp6NYzEf.lbzip) (1.5 KB)

## Masso Controller (Gen 1 Elite Machines)

- Machinist | [Onefinity Elite Machinist.lbdev](https://forum.onefinitycnc.com/uploads/short-url/agdTqXyxmxPJD9Z5WzjXBwmBuQC.lbdev) (3.5 KB)

- Woodworker | [Onefinity Elite Woodworker.lbdev](https://forum.onefinitycnc.com/uploads/short-url/dpqoNRP0lMo2B5xSKPhxwqq3PSi.lbdev) (3.5 KB)

- Journeyman | [Onefinity Elite Journeyman.lbdev](https://forum.onefinitycnc.com/uploads/short-url/qRgIk9u70WHOwrmVEM30x3KAI9B.lbdev) (3.5 KB)

- Foreman | [Onefinity Elite Foreman.lbdev](https://forum.onefinitycnc.com/uploads/short-url/icjnSYb88Vtg3o5WUa4X7Z0ZDuP.lbdev) (3.5 KB)

## Buildbotics Controller (Gen 1 Original and PRO models)

- Machinist | [Onefinity Original-Pro Machinist.lbdev](https://forum.onefinitycnc.com/uploads/short-url/oXKzOhWWC5DFoTsfwkdmuJRsJWW.lbdev) (3.2 KB)

- Woodworker | [Onefinity Original-Pro Woodworker.lbdev](https://forum.onefinitycnc.com/uploads/short-url/fJkPWnCpkcZNS6YzNbU1MKtuV1M.lbdev) (3.2 KB)

- Journeyman | [Onefinity Original-Pro Journeyman.lbdev](https://forum.onefinitycnc.com/uploads/short-url/z9omVvXOs7PJHkrnbSDrcfxiAEY.lbdev) (3.2 KB)

- Foreman | [Onefinity Original-Pro Foreman.lbdev](https://forum.onefinitycnc.com/uploads/short-url/nSemMTiGoi3em1rTh9UlW0ajhu6.lbdev) (3.2 KB)

* * *

If you are manually creating a profile and not selecting a premade on from above, you must select choose GRBL-M3 (1.1e or earlier) for all Series machines.  
 ![GRBL-M3](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/8/b/8b2db075bf1905a60d6b62539f5cf1be69e3cc2b.png)

---

_[View the full topic](https://forum.onefinitycnc.com/t/lightburn-device-profiles-for-all-series/11585)._