# Lightburn, Redline Controller and Camera support

**URL:** <https://forum.onefinitycnc.com/t/lightburn-redline-controller-and-camera-support/38816>\
**Category:** Feature Request\
**Created:** [May 26, 2026, 8:57pm UTC](https://forum.onefinitycnc.com/t/lightburn-redline-controller-and-camera-support/38816 "2026-05-26T20:57:44Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![SailorMike](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/sailormike/32/3290_2.png) [@SailorMike](https://forum.onefinitycnc.com/u/SailorMike)\
**Post date:** [May 26, 2026, 8:57pm UTC](https://forum.onefinitycnc.com/t/lightburn-redline-controller-and-camera-support/38816/1 "2026-05-26T20:57:44Z")

</div>

I’m currently exploring the capabilities of Lightburn. I learned from [this post](https://forum.onefinitycnc.com/t/does-the-redline-controller-already-support-a-camera/36104) that the Redline controller supports a USB camera. Has anyone attempted to use this setup to utilize the camera features in Lightburn, or is another setup necessary? I have to run Lightburn from a PC in another room from the CNC, and it would be super-useful to set up a Lightburn run using the camera features, which are extensively demonstrated on YouTube.