# Live edge Charcuterie board **URL:** \ **Category:** Finished Projects\ **Created:** [March 29, 2023, 2:19pm UTC](https://forum.onefinitycnc.com/t/live-edge-charcuterie-board/19741 "2023-03-29T14:19:11Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![tgunr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/tgunr/32/10947_2.png) [@tgunr](https://forum.onefinitycnc.com/u/tgunr)\ **Post date:** [March 29, 2023, 2:19pm UTC](https://forum.onefinitycnc.com/t/live-edge-charcuterie-board/19741/1 "2023-03-29T14:19:11Z")
Finished my latest project using white oak tree I had to cut down a couple years ago. Milled the slabs with an Alaska sawmill and started resurfacing them with the OneFinity X50 using a Amana Tool 45525 Carbide Tipped bit with the recommended settings at 2mm/pass. White oak is hard! Created the inlays with Vcarve Pro and cut with 1/8 and 1/6 bits at 9mm deep and filled with tinted epoxy then sanded to high gloss. ![IMG_3308](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/6/b/6ba974acb8bcb8944cfd00b397b530a5d5d19017.jpeg) ---
**Author:** ![MindOfMcClure](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/mindofmcclure/32/38_2.png) [@MindOfMcClure](https://forum.onefinitycnc.com/u/MindOfMcClure)\ **Post date:** [March 29, 2023, 3:10pm UTC](https://forum.onefinitycnc.com/t/live-edge-charcuterie-board/19741/2 "2023-03-29T15:10:57Z")
Great work Dave, this looks amazing. I love the two tone Epoxy inlay. Yes with bits that small and wood that hard you have to go slow, but the end result was worth the time and effort. -Alex ---
**Author:** ![PezWoodworks](https://avatars.discourse-cdn.com/v4/letter/p/ea5d25/32.png) [@PezWoodworks](https://forum.onefinitycnc.com/u/PezWoodworks)\ **Post date:** [March 29, 2023, 3:38pm UTC](https://forum.onefinitycnc.com/t/live-edge-charcuterie-board/19741/3 "2023-03-29T15:38:32Z")
Beautiful, very nice