# Loud Chatter and locks up when moved fast **URL:** \ **Category:** Uncategorized\ **Created:** [December 21, 2021, 9:56am UTC](https://forum.onefinitycnc.com/t/loud-chatter-and-locks-up-when-moved-fast/9708 "2021-12-21T09:56:28Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Photowoodguy](https://avatars.discourse-cdn.com/v4/letter/p/b38774/32.png) [@Photowoodguy](https://forum.onefinitycnc.com/u/Photowoodguy)\ **Post date:** [December 21, 2021, 9:56am UTC](https://forum.onefinitycnc.com/t/loud-chatter-and-locks-up-when-moved-fast/9708/1 "2021-12-21T09:56:28Z")
I have made sure numerous times that the machine was very square but when I use the joystick and move the unit around quickly shown in many videos it seems to lock up. Any suggestions would be helpful. If I just do small projects towards the front everything works great. Thank you ---
**Author:** ![Hermsen.BJ](https://avatars.discourse-cdn.com/v4/letter/h/779978/32.png) [@Hermsen.BJ](https://forum.onefinitycnc.com/u/Hermsen.BJ)\ **Post date:** [December 21, 2021, 11:41am UTC](https://forum.onefinitycnc.com/t/loud-chatter-and-locks-up-when-moved-fast/9708/2 "2021-12-21T11:41:48Z")
Is it only when going front to back to front? Take off the x axis and see if one side is stalling. ---
**Author:** ![Dustydave](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/dustydave/32/1776_2.png) [@Dustydave](https://forum.onefinitycnc.com/u/Dustydave)\ **Post date:** [December 21, 2021, 3:53pm UTC](https://forum.onefinitycnc.com/t/loud-chatter-and-locks-up-when-moved-fast/9708/3 "2021-12-21T15:53:20Z")
Dave Are you Homing your OF every time you turn it on? ---
**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\ **Post date:** [December 21, 2021, 4:39pm UTC](https://forum.onefinitycnc.com/t/loud-chatter-and-locks-up-when-moved-fast/9708/4 "2021-12-21T16:39:56Z")
Hey David, there was this discussion the other day: [https://forum.onefinitycnc.com/t/help-losing-home-during-carves/7022/18](https://forum.onefinitycnc.com/t/help-losing-home-during-carves/7022/18)