# Machine losing track of X/Y, 10.8" touchscreen going blank/black/blue screen

**URL:** <https://forum.onefinitycnc.com/t/machine-losing-track-of-x-y-10-8-touchscreen-going-blank-black-blue-screen/35873>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [October 18, 2025, 12:32am UTC](https://forum.onefinitycnc.com/t/machine-losing-track-of-x-y-10-8-touchscreen-going-blank-black-blue-screen/35873 "2025-10-18T00:32:25Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![modxmod](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/modxmod/32/32517_2.png) [@modxmod](https://forum.onefinitycnc.com/u/modxmod)\
**Post date:** [October 23, 2025, 6:28pm UTC](https://forum.onefinitycnc.com/t/machine-losing-track-of-x-y-10-8-touchscreen-going-blank-black-blue-screen/35873/6 "2025-10-23T18:28:56Z")

</div>

I’ve modified the dust separator bucket with some copper tape. I’m not declaring victory, but it has seemed better.

> [@Static electricity issues](https://forum.onefinitycnc.com/t/static-electricity-issues/23380/6):
>
> Last week I added some copper tape to my dust collector separator bucket and a bolt that I clip an ESD strap to. (The ESD strap plugs into the grounding plug on my power strip.) This setup seems to have reduced the static buildup a lot. (I had been getting electric shocks when I touched the bucket and the wood chips were standing on edge inside the bucket.) I was inspired by the Dustopper PRO video: [Grounding the Dustopper PRO – My Store](https://www.dustopper.com/blogs/help/grounding-the-dustopper-pro)

---

_[View the full topic](https://forum.onefinitycnc.com/t/machine-losing-track-of-x-y-10-8-touchscreen-going-blank-black-blue-screen/35873)._