# Machine moving outside machining area (MASSO) **URL:** \ **Category:** Elite Series (Masso & Redline) (Gen 1)\ **Created:** [December 14, 2025, 2:24pm UTC](https://forum.onefinitycnc.com/t/machine-moving-outside-machining-area-masso/36857 "2025-12-14T14:24:32Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Ken5](https://avatars.discourse-cdn.com/v4/letter/k/f0a364/32.png) [@Ken5](https://forum.onefinitycnc.com/u/Ken5)\ **Post date:** [December 14, 2025, 2:24pm UTC](https://forum.onefinitycnc.com/t/machine-moving-outside-machining-area-masso/36857/1 "2025-12-14T14:24:32Z")
Good morning folks Elite Foreman running 5.07 (just recently updated motor update) Just started a new project. Job setting origin centred in software Saved file to elite Masso inch default Homed machine moved to job centre location and zero x,y and zero as usual Started program machine took off to front looking for a G54 offset I am assuming an ATC I never programed one Is this an update issue if so how do I revert to previous settings? Thanks for your assistance ---
**Author:** ![IncrementalDesigns](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/incrementaldesigns/32/31328_2.png) [@IncrementalDesigns](https://forum.onefinitycnc.com/u/IncrementalDesigns)\ **Post date:** [December 14, 2025, 3:13pm UTC](https://forum.onefinitycnc.com/t/machine-moving-outside-machining-area-masso/36857/2 "2025-12-14T15:13:08Z")
Are you sure you had G54 xero’d? Not one of the other other work offsets? Can you post the first section of your Gcode? ---
**Author:** ![Graffix](https://avatars.discourse-cdn.com/v4/letter/g/ecc23a/32.png) [@Graffix](https://forum.onefinitycnc.com/u/Graffix)\ **Post date:** [December 14, 2025, 3:25pm UTC](https://forum.onefinitycnc.com/t/machine-moving-outside-machining-area-masso/36857/3 "2025-12-14T15:25:44Z")
Is this with the new redline and RTC controller? ---
**Author:** ![Ken5](https://avatars.discourse-cdn.com/v4/letter/k/f0a364/32.png) [@Ken5](https://forum.onefinitycnc.com/u/Ken5)\ **Post date:** [December 14, 2025, 4:28pm UTC](https://forum.onefinitycnc.com/t/machine-moving-outside-machining-area-masso/36857/4 "2025-12-14T16:28:52Z")
So its the Masso with Redline Spindle (manually conntrolled) All my other files seem to start at work origin but this file moves to the front of the table for a tool change ---
**Author:** ![Ken5](https://avatars.discourse-cdn.com/v4/letter/k/f0a364/32.png) [@Ken5](https://forum.onefinitycnc.com/u/Ken5)\ **Post date:** [December 14, 2025, 4:33pm UTC](https://forum.onefinitycnc.com/t/machine-moving-outside-machining-area-masso/36857/5 "2025-12-14T16:33:50Z")
File created: Sunday December 14 2025 - 08:48 AM) ( for Masso from Vectric) ( Material Size) ( X= 6.000, Y= 6.000 ,Z= 0.750) () (Toolpaths used in this file:) (3D Roughing 1) (Tools used in this file: ) (2 = End Mill {1/4"}) N13 G00 N14 G20 N15 G17 N16 G90 N17 G80 N18 M08 (End Mill {1/4"}) N20 T2 M06 N21 G00 Z0.8000 N22 S10000 M03 (Toolpath:- 3D Roughing 1) () N25 G94 N26 G00 X0.0000Y0.0000 ---
**Author:** ![MikeXYZ](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/mikexyz/32/32034_2.png) [@MikeXYZ](https://forum.onefinitycnc.com/u/MikeXYZ)\ **Post date:** [December 14, 2025, 4:56pm UTC](https://forum.onefinitycnc.com/t/machine-moving-outside-machining-area-masso/36857/6 "2025-12-14T16:56:53Z")
I don’t see any part of the code that switches the machine into the G54 work coordinate system (WCS). You could be in a different WCS, like G53, G55, G56, etc… On Masso, it says the current WCS at the top of the screen. If your not in G54 you can switch to it by typing G54 in the MDI, or there’s a quick-access button on the probing screen. A better program will insert a line that just says G54. Here’s what that looks like. ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/9/d/9d0dc2cc01a403989f05ed67601f438ad3126c7d.png)