# Machining Fixtures / Gage pins

**URL:** <https://forum.onefinitycnc.com/t/machining-fixtures-gage-pins/2654>\
**Category:** Uncategorized\
**Created:** [January 8, 2021, 4:31pm UTC](https://forum.onefinitycnc.com/t/machining-fixtures-gage-pins/2654 "2021-01-08T16:31:51Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![FejDaBul](https://avatars.discourse-cdn.com/v4/letter/f/b3f665/32.png) [@FejDaBul](https://forum.onefinitycnc.com/u/FejDaBul)\
**Post date:** [March 30, 2021, 8:03pm UTC](https://forum.onefinitycnc.com/t/machining-fixtures-gage-pins/2654/7 "2021-03-30T20:03:41Z")

</div>

I’ve seen a few videos of the OF running in the vertical position. Has anyone toyed with the idea of being able to “lock” the table in the vertical position and laying a part horizontally on a jig to cut tenons?  
My intention would be to make the modifications to a table similar to this (among others). Would it it be best to keep the opening through the bed close to one or the other Y rail &/or close to where the Y Rail is anchored? An example of a piece to cut a tenon on would be both ends of a 4x4 cross member for a farm table.

> [@Store CNC vertically?](https://forum.onefinitycnc.com/t/store-cnc-vertically/3310/2):
>
> I’ve seen it being used in the vertical position, if you search YouTube you should be able to fine it. Here is a video of a vertical storage unit for the onefinity. [[Woodworking: Making Fisher's Mobile Assembly Table] ](https://www.youtube.com/watch?v=6A4iHVVnDHo)

---

_[View the full topic](https://forum.onefinitycnc.com/t/machining-fixtures-gage-pins/2654)._