# Main menu options

**URL:** <https://forum.onefinitycnc.com/t/main-menu-options/20405>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [May 2, 2023, 8:00pm UTC](https://forum.onefinitycnc.com/t/main-menu-options/20405 "2023-05-02T20:00:49Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![WaywardWoodworker](https://avatars.discourse-cdn.com/v4/letter/w/e79b87/32.png) [@WaywardWoodworker](https://forum.onefinitycnc.com/u/WaywardWoodworker)\
**Post date:** [May 2, 2023, 8:07pm UTC](https://forum.onefinitycnc.com/t/main-menu-options/20405/2 "2023-05-02T20:07:28Z")

</div>

I’d call it the jog controls, you can use them to move the axis in a direction the specified distance selected below (0.005" 0.05" 0.5" 5"). Y+ will move the gantry towards the back, Y- will move the gantry towards the front, X- will move the spindle left, X+ will move the spindle to the right, Z+ will move the spindle up, Z- will move the spindle down.

The arrows move it diagonally, the target in the middle moves it to X,Y work zero, the Z0 moves the spindle to Z0

> [@Onefinity User Manual](https://forum.onefinitycnc.com/t/onefinity-user-manual/631):
>

---

_[View the full topic](https://forum.onefinitycnc.com/t/main-menu-options/20405)._