# Masso G3 build - Tangential knife success with Sheetcam

**URL:** <https://forum.onefinitycnc.com/t/masso-g3-build-tangential-knife-success-with-sheetcam/7730>\
**Category:** Aftermarket Controllers (Unsupported)\
**Created:** [September 15, 2021, 2:16am UTC](https://forum.onefinitycnc.com/t/masso-g3-build-tangential-knife-success-with-sheetcam/7730 "2021-09-15T02:16:33Z")\
**Posts on this page:** 1\
**Showing post:** 40

<div class="post-metadata">

**Author:** ![rblur01](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@rblur01](https://forum.onefinitycnc.com/u/rblur01)\
**Post date:** [September 21, 2021, 2:09am UTC](https://forum.onefinitycnc.com/t/masso-g3-build-tangential-knife-success-with-sheetcam/7730/40 "2021-09-21T02:09:28Z")

</div>

![IMG_20210920_210738](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/e/e5bc53ea3213704b3258a8aca4565346cd4ce692.jpeg)  
 ![IMG_20210920_210800](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/0/3/03ab9357f5ec0b218c98ef5c93ffc744e373c5de.jpeg)  
 ![IMG_20210920_210747](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/2/5/259aed4dd3e261b8c6fa01fb0db1fcebf0c27691.jpeg)

---

_[View the full topic](https://forum.onefinitycnc.com/t/masso-g3-build-tangential-knife-success-with-sheetcam/7730)._