# Masso USB Configuration (solved with link)

**URL:** <https://forum.onefinitycnc.com/t/masso-usb-configuration-solved-with-link/24425>\
**Category:** Elite Series (Masso & Redline) (Gen 1)\
**Created:** [January 2, 2024, 5:45pm UTC](https://forum.onefinitycnc.com/t/masso-usb-configuration-solved-with-link/24425 "2024-01-02T17:45:12Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [January 2, 2024, 5:56pm UTC](https://forum.onefinitycnc.com/t/masso-usb-configuration-solved-with-link/24425/2 "2024-01-02T17:56:25Z")

</div>

> [@Elite Masso USB Disconnects Troubleshooting FAQ](https://forum.onefinitycnc.com/t/elite-masso-usb-disconnects-troubleshooting-faq/20370):
>
> If you are experiencing USB disconnects on the Elite Masso, please go through the following troubleshooting steps. Basic testing includes checking: Try a different USB stick (must be 32gb or less with FAT32 formatting). If any additional hardware has been added to the machine and if so what it is? Do you you have a spindle installed or Makita router? There are 2 power outlets on the back of the power supply. What is connected to them? If one outlet is used for dust collection, then test runs wi…

---

_[View the full topic](https://forum.onefinitycnc.com/t/masso-usb-configuration-solved-with-link/24425)._