# Masso v5.0.6 breaks Freehold Esc

**URL:** <https://forum.onefinitycnc.com/t/masso-v5-0-6-breaks-freehold-esc/23279>\
**Category:** Controller (MASSO) Discussion\
**Created:** [November 10, 2023, 1:52pm UTC](https://forum.onefinitycnc.com/t/masso-v5-0-6-breaks-freehold-esc/23279 "2023-11-10T13:52:51Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![CommittotheIndian](https://avatars.discourse-cdn.com/v4/letter/c/d2c977/32.png) [@CommittotheIndian](https://forum.onefinitycnc.com/u/CommittotheIndian)\
**Post date:** [November 10, 2023, 1:52pm UTC](https://forum.onefinitycnc.com/t/masso-v5-0-6-breaks-freehold-esc/23279/1 "2023-11-10T13:52:51Z")

</div>

I just updated my Masso to v5.0.6 since I hadn’t seen any real negative issues with this version.

Now my Freehold Esc and red stop button do not function.

Anyone else experience this?

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [November 10, 2023, 2:27pm UTC](https://forum.onefinitycnc.com/t/masso-v5-0-6-breaks-freehold-esc/23279/2 "2023-11-10T14:27:39Z")

</div>

Did you create a ticket with masso or post on their forum? Any Masso related bugs must be posted at those two places for Masso to be aware of them and fix them. Onefinity does not make Masso firmware.

---

<div class="post-metadata">

**Author:** ![CommittotheIndian](https://avatars.discourse-cdn.com/v4/letter/c/d2c977/32.png) [@CommittotheIndian](https://forum.onefinitycnc.com/u/CommittotheIndian)\
**Post date:** [November 10, 2023, 3:02pm UTC](https://forum.onefinitycnc.com/t/masso-v5-0-6-breaks-freehold-esc/23279/3 "2023-11-10T15:02:43Z")

</div>

I have the ticket ready to post, I was just making sure I didn’t miss something simple. No reason to yell fire for steam.