# MDI - more than one line of Gcode at a time?

**URL:** <https://forum.onefinitycnc.com/t/mdi-more-than-one-line-of-gcode-at-a-time/8975>\
**Category:** Controller (Buildbotics) Discussion\
**Created:** [November 16, 2021, 3:00pm UTC](https://forum.onefinitycnc.com/t/mdi-more-than-one-line-of-gcode-at-a-time/8975 "2021-11-16T15:00:05Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [November 17, 2021, 4:07am UTC](https://forum.onefinitycnc.com/t/mdi-more-than-one-line-of-gcode-at-a-time/8975/3 "2021-11-17T04:07:03Z")

</div>

Hey Alan,

> [@Alphonse](#):
>
> I have tried all sorts of things from semicolons to Alt Return to . . . . . .

me I would instinctively have tried “\n” 🙂

Anyway the [Documentation is silent about this](https://buildbotics.com/manual-v1-1/#ControlPageMDITab)

---

_[View the full topic](https://forum.onefinitycnc.com/t/mdi-more-than-one-line-of-gcode-at-a-time/8975)._