# Mechatron spindles - discussion

**URL:** <https://forum.onefinitycnc.com/t/mechatron-spindles-discussion/11231>\
**Category:** Spindle/VFD (Aftermarket/Unsupported)\
**Created:** [February 15, 2022, 7:01pm UTC](https://forum.onefinitycnc.com/t/mechatron-spindles-discussion/11231 "2022-02-15T19:01:02Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [February 15, 2022, 8:04pm UTC](https://forum.onefinitycnc.com/t/mechatron-spindles-discussion/11231/3 "2022-02-15T20:04:20Z")

</div>

Hey Tom, hey Alan,

> [@TMToronto](#):
>
> I know of at least one member who owns one

but when I joined the forum, I saw that Mechatron was already [mentioned here](https://forum.onefinitycnc.com/t/80mm-spindle-and-vfd-choices/5679/24) and [here](https://forum.onefinitycnc.com/t/80mm-spindle-and-vfd-choices/5679/34) 🙂

Alan you know that there are [other german manufacturers](https://forum.onefinitycnc.com/t/spindles-lingering-questions/8643/6). The advantage with Mechatron is that they offer their products to end consumers and show [end user prices](https://www.spindel-shop.de/?language=en). They even have an [ebay shop](https://www.ebay.com/usr/mechatron-engineering)

---

_[View the full topic](https://forum.onefinitycnc.com/t/mechatron-spindles-discussion/11231)._