# Micro-tramming Adjustment? **URL:** \ **Category:** Elite Series (Masso & Redline) (Gen 1)\ **Created:** [July 22, 2023, 5:45pm UTC](https://forum.onefinitycnc.com/t/micro-tramming-adjustment/21546 "2023-07-22T17:45:33Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![ChrisS](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/chriss/32/22864_2.png) [@ChrisS](https://forum.onefinitycnc.com/u/ChrisS)\ **Post date:** [July 22, 2023, 7:32pm UTC](https://forum.onefinitycnc.com/t/micro-tramming-adjustment/21546/4 "2023-07-22T19:32:51Z")
> [@Tramming - Front To Back](https://forum.onefinitycnc.com/t/tramming-front-to-back/8421): > > There are a few methods to tram your machine. Loosening some z mount bolts, using 123 blocks, tram arms, folded pieces of tin foil, are all methods that can have acceptable outcomes. Left to right tram is relatively easy to correct. Front to back is a bit harder. There is a unique benefit of buying a Onefinity CNC machine is that every Onefinity machine has built in front to back tramming bolts on the X axis. These allow for tilt of the z slider front to back. There are 4 bolts on each foo… I think left to right the only thing to do is what i saud. Put a square up to it and you’ll get it pretty close then fine tune from there --- _[View the full topic](https://forum.onefinitycnc.com/t/micro-tramming-adjustment/21546)._