# MillMage postprocessor?

**URL:** <https://forum.onefinitycnc.com/t/millmage-postprocessor/33823>\
**Category:** Elite Series (Masso & Redline) (Gen 1)\
**Created:** [June 12, 2025, 1:13am UTC](https://forum.onefinitycnc.com/t/millmage-postprocessor/33823 "2025-06-12T01:13:55Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![doubleplay643](https://avatars.discourse-cdn.com/v4/letter/d/0ea827/32.png) [@doubleplay643](https://forum.onefinitycnc.com/u/doubleplay643)\
**Post date:** [June 12, 2025, 1:13am UTC](https://forum.onefinitycnc.com/t/millmage-postprocessor/33823/1 "2025-06-12T01:13:55Z")

</div>

I’m just checking to see if there are any plans to support a post-processor for MillMage CAM software.

Our maker shop is fluent in Lightburn which has a much lower learning curve than our current CAM option, the free version of Fusion.

---

<div class="post-metadata">

**Author:** ![PD1955](https://avatars.discourse-cdn.com/v4/letter/p/5f9b8f/32.png) [@PD1955](https://forum.onefinitycnc.com/u/PD1955)\
**Post date:** [October 30, 2026, 1:51am UTC](https://forum.onefinitycnc.com/t/millmage-postprocessor/33823/2 "2026-10-30T01:51:57Z")

</div>

Plenty of views but no answers , this is all that’s holding me back from purchasing a O?F /

PAT1955

---

<div class="post-metadata">

**Author:** ![JimHatch](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/jimhatch/32/3928_2.png) [@JimHatch](https://forum.onefinitycnc.com/u/JimHatch)\
**Post date:** [October 30, 2026, 2:26pm UTC](https://forum.onefinitycnc.com/t/millmage-postprocessor/33823/3 "2026-10-30T14:26:30Z")

</div>

> [@PD1955](#):
>
> Plenty of views but no answers

That is an answer. You might stumble across a couple of users here but the primary apps are those promoted by Onefinity - Vectric, Carveco, Fusion & Carbide Create probably account for 95+% of the users. Yours is the first query about Millmage I’ve seen over the past 5 years except for a brief mention in a couple of other posts this summer.

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [October 30, 2026, 2:31pm UTC](https://forum.onefinitycnc.com/t/millmage-postprocessor/33823/4 "2026-10-30T14:31:02Z")

</div>

We have cut several things with Millmage on our Onefinity Machines.