# Missing bolts on Z axis

**URL:** <https://forum.onefinitycnc.com/t/missing-bolts-on-z-axis/3405>\
**Category:** Uncategorized\
**Created:** [February 9, 2021, 7:28am UTC](https://forum.onefinitycnc.com/t/missing-bolts-on-z-axis/3405 "2021-02-09T07:28:24Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jander1204](https://avatars.discourse-cdn.com/v4/letter/j/34f0e0/32.png) [@Jander1204](https://forum.onefinitycnc.com/u/Jander1204)\
**Post date:** [February 9, 2021, 7:28am UTC](https://forum.onefinitycnc.com/t/missing-bolts-on-z-axis/3405/1 "2021-02-09T07:28:24Z")

</div>

My machine is missing the bolts to bolt the Z axis to the X rail. I sent onefinity an e-mail telling them that and they said they would send them out but that’s been almost a month ago. Can someone tell what size and length they are so I can just go but some.

---

<div class="post-metadata">

**Author:** ![Machinist](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/machinist/32/36465_2.png) [@Machinist](https://forum.onefinitycnc.com/u/Machinist)\
**Post date:** [February 9, 2021, 11:08am UTC](https://forum.onefinitycnc.com/t/missing-bolts-on-z-axis/3405/2 "2021-02-09T11:08:25Z")

</div>

That is highly unusual for their customer service. But anyway, the screws are M5 x 12mm low-head socket head screws, just like this. It’s very critical that they be low-head so the Z carriage will clear the screw heads, and the length is critical so they’re not too long & hit the bearings. A really good hardware store may carry these, but not a likely find at a big-box store.

> **[McMaster-Carr](https://www.mcmaster.com/93070A123/)**
>
> McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

---

<div class="post-metadata">

**Author:** ![Mark](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/mark/32/129_2.png) [@Mark](https://forum.onefinitycnc.com/u/Mark)\
**Post date:** [February 9, 2021, 2:37pm UTC](https://forum.onefinitycnc.com/t/missing-bolts-on-z-axis/3405/3 "2021-02-09T14:37:03Z")

</div>

Hey James… I hope you’re doing well! I checked with the team and they have sent a couple emails along with the tracking info. The Screws should have arrived. Can you please email Jenn directly at [info@onefinitycnc.com](mailto:info@onefinitycnc.com) and she’ll get things sorted. Talk soon…
