# Missing spacers (solved, only needed and supplied with FOREMAN sized machines)

**URL:** <https://forum.onefinitycnc.com/t/missing-spacers-solved-only-needed-and-supplied-with-foreman-sized-machines/25841>\
**Category:** Uncategorized\
**Created:** [March 10, 2024, 7:51pm UTC](https://forum.onefinitycnc.com/t/missing-spacers-solved-only-needed-and-supplied-with-foreman-sized-machines/25841 "2024-03-10T19:51:20Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![mexicancustard](https://avatars.discourse-cdn.com/v4/letter/m/b9e5f3/32.png) [@mexicancustard](https://forum.onefinitycnc.com/u/mexicancustard)\
**Post date:** [March 10, 2024, 7:51pm UTC](https://forum.onefinitycnc.com/t/missing-spacers-solved-only-needed-and-supplied-with-foreman-sized-machines/25841/1 "2024-03-10T19:51:20Z")

</div>

Are the table top spacers included? I dont see them listed in the accessories. So I assumed they would come with the unit if I didnt order the onefinity table. Please let me know how to get a set for the elite journeyman. Waited 2.5 months and now i cant use it. I dont wont to create some out of plywood just to replace them when i can get the real ones.

---

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [March 10, 2024, 8:36pm UTC](https://forum.onefinitycnc.com/t/missing-spacers-solved-only-needed-and-supplied-with-foreman-sized-machines/25841/2 "2024-03-10T20:36:03Z")

</div>

Hey Flann,

the Journeyman which has two 35 mm rails on Y axes does not need risers. The risers are for Foreman which has 50 mm rails on Y axes. 50 mm rails’ feet would not touch the table without risers because of the carriage.

> [@Onefinity Riser Blocks](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641/48):
>
> This is also the reason why the foot of 50 mm rail is floating above ground in this image here:
> 
> ![3a880c073f2c1aeeef1aa9a5143759df7dd12bf3_cropped_and_marked_with_arrow_50pct](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/a/a/aa12fc370c860358d5f606601e446f36e839650d.jpeg)  
> [Differences Between 50 mm rails and 35 mm rails](https://forum.onefinitycnc.com/t/differences-between-x-50-rails-upgrade-and-x-35-rails-standard/6033)

 ![Foreman_Riser_Blocks_in_the_Elite_Manual](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/f/f/ffe3951ed174bcf44b00199afff4a42ea550c376.png)