# Monitor size adjustment

**URL:** <https://forum.onefinitycnc.com/t/monitor-size-adjustment/2847>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [January 16, 2021, 8:41pm UTC](https://forum.onefinitycnc.com/t/monitor-size-adjustment/2847 "2021-01-16T20:41:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Fishfire](https://avatars.discourse-cdn.com/v4/letter/f/a3d4f5/32.png) [@Fishfire](https://forum.onefinitycnc.com/u/Fishfire)\
**Post date:** [January 16, 2021, 8:41pm UTC](https://forum.onefinitycnc.com/t/monitor-size-adjustment/2847/1 "2021-01-16T20:41:01Z")

</div>

Good afternoon all. I went to the Goodwill and picked up a monitor with HDMI and a mouse and a keyboard four less than $10. Everything seems to work I just don’t know how to adjust the size of of everything to fit my monitor anybody have any ideas?

---

<div class="post-metadata">

**Author:** ![RandysView](https://avatars.discourse-cdn.com/v4/letter/r/53a042/32.png) [@RandysView](https://forum.onefinitycnc.com/u/RandysView)\
**Post date:** [January 17, 2021, 3:05am UTC](https://forum.onefinitycnc.com/t/monitor-size-adjustment/2847/2 "2021-01-17T03:05:57Z")

</div>

This should be standard Raspberry Pi configuration and is detailed here: [How to change screen resolution of Raspberry Pi - Stack Overflow](https://stackoverflow.com/questions/22891235/how-to-change-screen-resolution-of-raspberry-pi)

Either use a keyboard and mouse and Ctrl-t Ctrl-c to get a command window or SSH in (bbmc/onefinity). Either should work.