# Mounting onefinity at a 45

**URL:** <https://forum.onefinitycnc.com/t/mounting-onefinity-at-a-45/13812>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [June 25, 2022, 2:28pm UTC](https://forum.onefinitycnc.com/t/mounting-onefinity-at-a-45/13812 "2022-06-25T14:28:39Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![TDE](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/tde/32/31894_2.png) [@TDE](https://forum.onefinitycnc.com/u/TDE)\
**Post date:** [June 28, 2022, 3:36pm UTC](https://forum.onefinitycnc.com/t/mounting-onefinity-at-a-45/13812/6 "2022-06-28T15:36:04Z")

</div>

You can use pipe clamps to lock the table in place if you use round linear bearings, that would allow you to lock into any position.

My machine looks a little messy right now but you get the idea…

 ![shaft-collar-qcl-a](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/1/2/121e7125b396951f15e84dc0bd99eff4cedc0bd8.jpeg)  
 ![Shaft Collar Double](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/e/ea213ab402153c97e492f05145e51c93d5abfb4e.jpeg)  
 ![20220424_152058](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/9/9c5e33ddac644ac24171cb37f9ca6e6486e89b83.jpeg)  
 ![20220424_152109](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/7/7e3df7e023b183df213eaee72ec7264c02677e9d.jpeg)

---

_[View the full topic](https://forum.onefinitycnc.com/t/mounting-onefinity-at-a-45/13812)._