# My CNC ready for pick up!

**URL:** <https://forum.onefinitycnc.com/t/my-cnc-ready-for-pick-up/13020>\
**Category:** Uncategorized\
**Created:** [May 12, 2022, 9:22am UTC](https://forum.onefinitycnc.com/t/my-cnc-ready-for-pick-up/13020 "2022-05-12T09:22:39Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Terryjames](https://avatars.discourse-cdn.com/v4/letter/t/b5e925/32.png) [@Terryjames](https://forum.onefinitycnc.com/u/Terryjames)\
**Post date:** [May 12, 2022, 9:22am UTC](https://forum.onefinitycnc.com/t/my-cnc-ready-for-pick-up/13020/1 "2022-05-12T09:22:39Z")

</div>

Well the great fun starts. My woodworker is ready for pick up this Friday May 13/22 and ahead of time . Can’t wait !!

---

<div class="post-metadata">

**Author:** ![Sawdustmaker](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/sawdustmaker/32/9514_2.png) [@Sawdustmaker](https://forum.onefinitycnc.com/u/Sawdustmaker)\
**Post date:** [May 12, 2022, 4:58pm UTC](https://forum.onefinitycnc.com/t/my-cnc-ready-for-pick-up/13020/2 "2022-05-12T16:58:54Z")

</div>

Congrats!  
I just ordered one for pickup too… hoping to get it before Aug!  
Would be nice if it was early 🙂 .  
Did you order w/controller and screen too?  
I did, just to make initial setup easy.

What software will you use?  
I was already using Vcarve & Aspire. (will likely continue with Aspire)

Make sure to post how pickup and setup goes.

Dave

---

<div class="post-metadata">

**Author:** ![Terryjames](https://avatars.discourse-cdn.com/v4/letter/t/b5e925/32.png) [@Terryjames](https://forum.onefinitycnc.com/u/Terryjames)\
**Post date:** [May 12, 2022, 5:54pm UTC](https://forum.onefinitycnc.com/t/my-cnc-ready-for-pick-up/13020/3 "2022-05-12T17:54:05Z")

</div>

Yes got the wireless controller and touchscreen and zero plate and for software I’m using Carveco Maker. Will post how everything goes in picking up my order I’m only like 40 mins away.

---

<div class="post-metadata">

**Author:** ![Terryjames](https://avatars.discourse-cdn.com/v4/letter/t/b5e925/32.png) [@Terryjames](https://forum.onefinitycnc.com/u/Terryjames)\
**Post date:** [May 13, 2022, 4:27pm UTC](https://forum.onefinitycnc.com/t/my-cnc-ready-for-pick-up/13020/4 "2022-05-13T16:27:41Z")

</div>

Picked up my order this morning, pretty cool place and very nice people that work there.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/c/c35ecea4b4c67725904195fbefb56c9c5e65b75a.jpeg)

---

<div class="post-metadata">

**Author:** ![49COE](https://avatars.discourse-cdn.com/v4/letter/4/0ea827/32.png) [@49COE](https://forum.onefinitycnc.com/u/49COE)\
**Post date:** [May 13, 2022, 4:49pm UTC](https://forum.onefinitycnc.com/t/my-cnc-ready-for-pick-up/13020/5 "2022-05-13T16:49:24Z")

</div>

WooHoo For you! How early was it?

---

<div class="post-metadata">

**Author:** ![Terryjames](https://avatars.discourse-cdn.com/v4/letter/t/b5e925/32.png) [@Terryjames](https://forum.onefinitycnc.com/u/Terryjames)\
**Post date:** [May 13, 2022, 5:30pm UTC](https://forum.onefinitycnc.com/t/my-cnc-ready-for-pick-up/13020/6 "2022-05-13T17:30:02Z")

</div>

I ordered on April 22 and picked up May13  
I think it’s like 2 weeks early. They look very busy there.

---

<div class="post-metadata">

**Author:** ![Sawdustmaker](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/sawdustmaker/32/9514_2.png) [@Sawdustmaker](https://forum.onefinitycnc.com/u/Sawdustmaker)\
**Post date:** [May 18, 2022, 5:39pm UTC](https://forum.onefinitycnc.com/t/my-cnc-ready-for-pick-up/13020/7 "2022-05-18T17:39:22Z")

</div>

That is great… I bet you are setup and have done your first carve.  
I am waiting to build table.It will flip up to roll out of the way when needed… just not sure which way yet.  
I have access to an Iconic CNC thorough work and am using Aspire to design.  
working on v carve inlays for cutting boards… lots things in my brain waiting to get out… lol.