# My table with vertical holding

**URL:** <https://forum.onefinitycnc.com/t/my-table-with-vertical-holding/14133>\
**Category:** Machine Setups\
**Created:** [July 14, 2022, 6:05pm UTC](https://forum.onefinitycnc.com/t/my-table-with-vertical-holding/14133 "2022-07-14T18:05:11Z")\
**Posts on this page:** 1\
**Showing post:** 27

<div class="post-metadata">

**Author:** ![pwpacp](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/pwpacp/32/1718_2.png) [@pwpacp](https://forum.onefinitycnc.com/u/pwpacp)\
**Post date:** [January 2, 2023, 10:14pm UTC](https://forum.onefinitycnc.com/t/my-table-with-vertical-holding/14133/27 "2023-01-02T22:14:30Z")

</div>

I’m thinking of taking the plunge by adding vertical hold to my table and yours gives me lots to consider.  
Not intending to hijack the tread but I too picked up the Rikon 14" and love it save two exceptions.  
My shop floor is hardwood and the Rikon wheels cut grooves in it when moving around so I opted for a Shop Fox portable set instead…big improvement and was cheaper than the Rikon wheel kit.  
Secondly was dust collection, so I added dust extraction using 3/4" PVC pipe under the table insert. Seems to work pretty good so far.

---

_[View the full topic](https://forum.onefinitycnc.com/t/my-table-with-vertical-holding/14133)._