# Need to Reflash 1.6.1 help

**URL:** <https://forum.onefinitycnc.com/t/need-to-reflash-1-6-1-help/30694>\
**Category:** Controller (Buildbotics) Discussion\
**Created:** [February 1, 2025, 8:27pm UTC](https://forum.onefinitycnc.com/t/need-to-reflash-1-6-1-help/30694 "2025-02-01T20:27:44Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Desertwoods](https://avatars.discourse-cdn.com/v4/letter/d/d9b06d/32.png) [@Desertwoods](https://forum.onefinitycnc.com/u/Desertwoods)\
**Post date:** [February 1, 2025, 8:27pm UTC](https://forum.onefinitycnc.com/t/need-to-reflash-1-6-1-help/30694/1 "2025-02-01T20:27:45Z")

</div>

After upgrading to 1.6.1 my spindle will not turn on turn on and run spindle speeds. If I switch the EM60 spindle to manual speeds it runs fine and runs the gcode.  
I have the card out of the BB controller, just need to know where to get the new code to download into the card.  
Original x-35 CnC

Don

---

<div class="post-metadata">

**Author:** ![Dr-Al](https://avatars.discourse-cdn.com/v4/letter/d/cc9497/32.png) [@Dr-Al](https://forum.onefinitycnc.com/u/Dr-Al)\
**Post date:** [February 1, 2025, 8:39pm UTC](https://forum.onefinitycnc.com/t/need-to-reflash-1-6-1-help/30694/2 "2025-02-01T20:39:29Z")

</div>

Is this what you are looking for?  
[https://forum.onefinitycnc.com/t/how-to-reflash-the-operating-system-on-the-onefinity-bb-controller-full-sd-card-image/5659](https://forum.onefinitycnc.com/t/how-to-reflash-the-operating-system-on-the-onefinity-bb-controller-full-sd-card-image/5659)

---

<div class="post-metadata">

**Author:** ![Desertwoods](https://avatars.discourse-cdn.com/v4/letter/d/d9b06d/32.png) [@Desertwoods](https://forum.onefinitycnc.com/u/Desertwoods)\
**Post date:** [February 2, 2025, 7:52pm UTC](https://forum.onefinitycnc.com/t/need-to-reflash-1-6-1-help/30694/4 "2025-02-02T19:52:15Z")

</div>

Thanks very interesting to know

---

<div class="post-metadata">

**Author:** ![Desertwoods](https://avatars.discourse-cdn.com/v4/letter/d/d9b06d/32.png) [@Desertwoods](https://forum.onefinitycnc.com/u/Desertwoods)\
**Post date:** [February 2, 2025, 7:53pm UTC](https://forum.onefinitycnc.com/t/need-to-reflash-1-6-1-help/30694/5 "2025-02-02T19:53:57Z")

</div>

I do believe that is exactly what im looking for Thank You

---

<div class="post-metadata">

**Author:** ![Desertwoods](https://avatars.discourse-cdn.com/v4/letter/d/d9b06d/32.png) [@Desertwoods](https://forum.onefinitycnc.com/u/Desertwoods)\
**Post date:** [February 7, 2025, 6:07pm UTC](https://forum.onefinitycnc.com/t/need-to-reflash-1-6-1-help/30694/6 "2025-02-07T18:07:01Z")

</div>

Update to my last post I ordered the sim card from onefinity, inserted, turned it on no change with my spindle. The spindle does not come up to speed, dosen’t come on at all until i put it into manual position and manually run my spindle speed to the working speed.  
All of this because i updated my Onefinity software to the newest version, my mistake.  
So anyone have any ideas how to get this resolved. In the controller the spindle is name correctly, EM60