# Network Share access like Buildbotics controller **URL:** \ **Category:** Elite Series (Masso & Redline) (Gen 1)\ **Created:** [July 28, 2024, 6:53pm UTC](https://forum.onefinitycnc.com/t/network-share-access-like-buildbotics-controller/28041 "2024-07-28T18:53:28Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Sylthecru](https://avatars.discourse-cdn.com/v4/letter/s/34f0e0/32.png) [@Sylthecru](https://forum.onefinitycnc.com/u/Sylthecru)\ **Post date:** [July 28, 2024, 6:53pm UTC](https://forum.onefinitycnc.com/t/network-share-access-like-buildbotics-controller/28041/1 "2024-07-28T18:53:28Z")
I have searched high and low and was unable to locate a way to connect the Masso controller to a network share like I was able to with the buildbotics controller. is mounting a NFS share or CIFS share possible with the Masso controller? I do know there is the Masso link which still requires me to use a PC to get the gcode to the controller but mounting a network share was much more convenient. ---
**Author:** ![Dirkus](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/dirkus/32/9060_2.png) [@Dirkus](https://forum.onefinitycnc.com/u/Dirkus)\ **Post date:** [July 29, 2024, 10:21pm UTC](https://forum.onefinitycnc.com/t/network-share-access-like-buildbotics-controller/28041/2 "2024-07-29T22:21:49Z")
Currently Masso controllers only support Masso Link pushing files to the USB stick or drive mounted on the controller. There is not a method to reach out from the controller to access and network resource. Dirkus ---
**Author:** ![Sylthecru](https://avatars.discourse-cdn.com/v4/letter/s/34f0e0/32.png) [@Sylthecru](https://forum.onefinitycnc.com/u/Sylthecru)\ **Post date:** [July 29, 2024, 11:25pm UTC](https://forum.onefinitycnc.com/t/network-share-access-like-buildbotics-controller/28041/3 "2024-07-29T23:25:20Z")
Thank you for the confirmation