# New 10 inch monitor for big fingers! **URL:** \ **Category:** Uncategorized\ **Created:** [March 19, 2021, 11:58pm UTC](https://forum.onefinitycnc.com/t/new-10-inch-monitor-for-big-fingers/4439 "2021-03-19T23:58:08Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Bear](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/bear/32/30015_2.png) [@Bear](https://forum.onefinitycnc.com/u/Bear)\ **Post date:** [March 19, 2021, 11:58pm UTC](https://forum.onefinitycnc.com/t/new-10-inch-monitor-for-big-fingers/4439/1 "2021-03-19T23:58:08Z")
Hi everyone… I’ve been hanging around the forum for a while keeping up with everyone’s experiences with the Onefinity. I hit the ground running when I got my machine and I haven’t stopped. All I can say is the OF is a beast of a machine and I couldn’t be happier. I just got the 10" screen today, hooked it up, and it instantly solved the “big” fingers" and “poor eyesight” issues. ![20210319_180122](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/1/1d74487a411da52e74c411c0dff206db11d2c220.jpeg) ![20210319_180716](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/9/d/9d366a81db74bb3e8a4291d48b44ed93b2dc4fca.jpeg) ![20210319_180750](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/5/505c6974db6cb26cf56f57067abe141a05610e16.jpeg) ---
**Author:** ![CNCNewbie](https://avatars.discourse-cdn.com/v4/letter/c/a3d4f5/32.png) [@CNCNewbie](https://forum.onefinitycnc.com/u/CNCNewbie)\ **Post date:** [March 20, 2021, 4:17am UTC](https://forum.onefinitycnc.com/t/new-10-inch-monitor-for-big-fingers/4439/2 "2021-03-20T04:17:29Z")
I will have my Onefinity up and running tomorrow and also received the new 10” monitor and I love the kickstand on the back. While I have yet to power everything up, I couldn’t agree more, it is a beast! ---
**Author:** ![Kal](https://avatars.discourse-cdn.com/v4/letter/k/9de053/32.png) [@Kal](https://forum.onefinitycnc.com/u/Kal)\ **Post date:** [March 25, 2021, 11:48pm UTC](https://forum.onefinitycnc.com/t/new-10-inch-monitor-for-big-fingers/4439/3 "2021-03-25T23:48:59Z")
I just got the large monitor and the 640 x480 resolution seems wrong as I have to scroll to see the full contents of the screen. Also my touch screen is not responsive as there is a cursor on the screen as if there were a mouse connected. I checked the setting and cannot modify the resolution. Not very impressed. You can see the cursor on the far right in the screen above. ---
**Author:** ![CNCNewbie](https://avatars.discourse-cdn.com/v4/letter/c/a3d4f5/32.png) [@CNCNewbie](https://forum.onefinitycnc.com/u/CNCNewbie)\ **Post date:** [March 25, 2021, 11:51pm UTC](https://forum.onefinitycnc.com/t/new-10-inch-monitor-for-big-fingers/4439/4 "2021-03-25T23:51:20Z")
Not sure on the resolution but swap your 2 USB C cables you have plugged into the monitor. My was the same way but once I just swapped the plug-ins, the touch screen worked perfect. As mentioned not sure on the resolution as I also have to scroll to see everything. ---
**Author:** ![ropin3231620](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/ropin3231620/32/1091_2.png) [@ropin3231620](https://forum.onefinitycnc.com/u/ropin3231620)\ **Post date:** [March 26, 2021, 1:19am UTC](https://forum.onefinitycnc.com/t/new-10-inch-monitor-for-big-fingers/4439/5 "2021-03-26T01:19:31Z")
Mine was the same way. Switched the USB cables and everything worked as I thought it should. No issues since ---
**Author:** ![Kal](https://avatars.discourse-cdn.com/v4/letter/k/9de053/32.png) [@Kal](https://forum.onefinitycnc.com/u/Kal)\ **Post date:** [March 26, 2021, 1:49am UTC](https://forum.onefinitycnc.com/t/new-10-inch-monitor-for-big-fingers/4439/6 "2021-03-26T01:49:53Z")
Thx the cable swap solved the problem. ---
**Author:** ![Bear](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/bear/32/30015_2.png) [@Bear](https://forum.onefinitycnc.com/u/Bear)\ **Post date:** [March 26, 2021, 2:24am UTC](https://forum.onefinitycnc.com/t/new-10-inch-monitor-for-big-fingers/4439/7 "2021-03-26T02:24:28Z")
Hey guys Just so you know… when you get the monitor… the USBC+ goes to the power plug… and the USBC goes to the controller… 😁 ---
**Author:** ![Luckyspider8](https://avatars.discourse-cdn.com/v4/letter/l/bb73d2/32.png) [@Luckyspider8](https://forum.onefinitycnc.com/u/Luckyspider8)\ **Post date:** [May 16, 2021, 2:25am UTC](https://forum.onefinitycnc.com/t/new-10-inch-monitor-for-big-fingers/4439/8 "2021-05-16T02:25:35Z")
What about the wires on the opposite side?